Cisco Buying and Configuration Tips for Average Joe Cisco Forum FAQ1. Buy a new-never-used Cisco equipment from reliable store or seller
2. When you buy the equipment, don't forget to buy also the proper Smartnet contract for the equipment. Following FAQ has more info on Smartnet.
»Cisco Forum FAQ »What is Smartnet? Do I need one?
3. To make it easy for you, buy both the equipment and the Smartnet contract from the same store or seller; and have them register the equipment
4. For most home users, Cisco 850 or 870 series router should be sufficient
Now let's say you already have the equipment and it is time for installation and configuration. When you have no or limited knowledge of networking, here are some tips.
1. When you plan to connect the equipment to your ISP, make sure you have all the info you need. There are things you need to ask your ISP and other things you might need to ask your seller or store where you buy the Cisco equipment.
2. Questions to ask your ISP include
* Connection method to ISP: PPP (either PPPoE or PPPoA), static IP, DHCP (dynamically assigned)
* IP address you will get from your ISP (the public IP address) along with the subnet mask, default gateway, and DNS server IP address
* Equipment speed setting necessary: full duplex, half duplex, or auto
Note:
Following FAQ lists some things to expect when dealing with ISP to setup network for home users and small businesses.
»Cisco Forum FAQ »Things to expect when setup network for home or small business
3. Questions to ask your seller or store include
* MAC address (or addresses) of your Cisco equipment
* Cisco TAC or Support Center phone number
4. Once you have all the necessary info, follow the Quick Start Up instruction that come with the equipment to install and setup
For a glimpse, it looks like there are a lot to prepare when dealing with Cisco equipment. Well, don't quit just yet. :)
All those things are necessary (sometime required) to make things go smoothly. Keep in mind that Cisco equipments are built with reliability as #1 priority. Therefore Cisco equipments can be "picky" in terms of installation, configuration, and support. All of these are to ensure that everything work just as is supposed to be.
You might ask, "why do I not have to go through this with Netgear, Linksys, DLink, or similar brand?". Yes, those brands are easy to use, are they? :) However that easiness comes with big consequences. The brand sacrifices reliability a lot. That is why when you poke into Netgear, Linksys, or DLink forum; you always find horror stories that leads to unreliable equipments.
So prepare yourself. There might be few bumps in the ride. Relax, it is only a process. We are always here to help anyway. Once you get through it, you can just leave your Cisco equipment alone and never to be touched again. It runs solid as a rock once you get it right :D
feedback form
by aryoba
last modified: 2007-11-05 09:03:18