[Unlock] WRTP54G with Firmware 5.01.04 Page 4

[Unlock] WRTP54G with Firmware 5.01.04 Page 4
Links: home · search · speed test · login · more ·

Links: Reply New Topic
Forums » Voice Over IP - VOIP » VOIP Tech Chat » [Unlock] WRTP54G with Firmware 5.01.04
page: 1 · 2 · 3 · 4
DogFace05 @ 8th Sep 04:26AM:
Re: [Unlock] WRTP54G with Firmware 5.01.04

said by boredwild :

Dogface05, can you tell us what you charge to unlock the ACN SPA-2102?

I don't believe I can answer this question publicly on this forum, or in any way discuss any topic here related to services I offer, without it somehow violating forum rules.

The few times in the past, when I've posted in reply to specific questions asked of me on this forum about my unlocking service, I've gotten heat from the site moderator, and complaints from a few militant members who harbor resentment toward me for unknown reasons.

Unless this site's moderators explicitly post their consent here to my answering your question, I'm afraid all I can suggest is that you contact me by private IM or email with any questions you may have. I will not post my email address, but you may be able to find it posted by others on this and/or some other message boards.
reply

a94cobra @ 10th Sep 02:18PM:
Re: [Unlock] WRTP54G with Firmware 5.01.04

said by jetzhu :

The following method is untested, just an idea:
Possible to change the firmware from 5.01.04 directly to modified 3.1.24 NA which is created by the following steps
»Re: New WRTP54G-NA firmware 3.1.24 released 3-27-07
For RTP300
1. Download the RTP300 3.1.24 firmware from the linksys site (»www.linksys.com/servlet/Satellit···ondetail)
2. use HexEditor change offset 0x17 from 4D to 4C.
3. At offset 0x3B0004, change 85 DA 20 BB to 3B A5 4D DA
For WRTP54G, WRTP54G have different pattern
2. Change HEX offset 0x17 from 4D to 4C
3. Change HEX offset 0x3B0004 from 71 FB 16 5F to CF 84 7B 3E

I tried this on a WRTP54G with the 5.01.04 and was successfull. At first upon reboot the router seems bricked. Computer would not get an IP. Even after power cycle. But after the 10sec reset, it came up and I logged in to see 3.1.24 Voice section is there and reports 3.1.22

Not sure where to go from here but the router is downgraded with this method.
reply

jetzhu @ 10th Sep 05:40PM:
Re: [Unlock] WRTP54G with Firmware 5.01.04

I believe it's also unlocked. you can go gizmo5.com apply for an account. and Ipkall.com to apply for a phone number. After setup your ATA with the information you got from the above two websites, you can got other's call you at a US / DC phone number on your unlocked device.
reply

mazilo @ 10th Sep 08:01PM:
Re: [Unlock] WRTP54G with Firmware 5.01.04

said by a94cobra :

I tried this on a WRTP54G with the 5.01.04 and was successfull. At first upon reboot the router seems bricked. Computer would not get an IP. Even after power cycle. But after the 10sec reset, it came up and I logged in to see 3.1.24 Voice section is there and reports 3.1.22

After a factory reset and you still see firmware v3.1.22, then your upgrade to v5.01.04 doesn't seem to be of any success; otherwise, you would be seeing the new version of just installed firmware.
--
Mazilo always prays for FREEBIES!
US Phone: +1-678-601-0907
UK Phone: +44-703-194-2574

reply

a94cobra @ 11th Sep 02:09PM:
Re: [Unlock] WRTP54G with Firmware 5.01.04

I went from 5.01.04 to 3.1.24

Successful.
reply

mazilo @ 11th Sep 05:38PM:
Re: [Unlock] WRTP54G with Firmware 5.01.04

said by a94cobra :

I went from 5.01.04 to 3.1.24

Successful.

Congratulation! Cheers.
--
Mazilo always prays for FREEBIES!
US Phone: +1-678-601-0907
UK Phone: +44-703-194-2574

reply

janakjanak @ 13th Sep 07:06PM:
Re: [Unlock] WRTP54G with Firmware 5.01.04

Hi, I am new here please help me.

I bought RTP300 from ebay recently. It is locked by vonage firmware version 5.01.04. I tried zetzhu's instructions on the page »Re: [Unlock] WRTP54G with Firmware 5.01.04

Everything looks fine, I see von10062.bin downloaded from TFTP server log. But after that power light did not blink and firmware version is still 5.01.04.

Dont know if my ebay seller tried to unlock this unit earlier, but i see a character "n" next to unlocked as below in console_state env value.

CONSOLE_STATE unlocked n
BOOTCFG m:f:"IMAGE_B"
ProductID CYLL

Any help would be appriciated.
reply

Phoenix2088 @ 13th Sep 07:58PM:
Re: [Unlock] WRTP54G with Firmware 5.01.04

I have followed jetzhu's instructions and I think I almost got it. However at the last ping hack step
(127.0.0.1 &&sh /var/tmp/rf) I get the following.

The router's (WRTP54G) power light does not blink and is still running firmware 5.01.04. If anyone can help me and point out what I might have done wrong it would be greatly appreciated.

Background Info:
Running TFTPD32, AV and Firewall off during ping hack. Firmware is in Program Files/tftp32 directory as well as the rf file. TFTP32 is set to use the previously mentioned directory as root. I have already successfully ping hacked to unlock the console.
reply

anon @ 14th Sep 04:44PM:
Re: [Unlock] WRTP54G with Firmware 5.01.04

said by Phoenix2088 :

I have followed jetzhu's instructions and I think I almost got it. However at the last ping hack step
(127.0.0.1 &&sh /var/tmp/rf) I get the following.

The router's (WRTP54G) power light does not blink and is still running firmware 5.01.04. If anyone can help me and point out what I might have done wrong it would be greatly appreciated.

Background Info:
Running TFTPD32, AV and Firewall off during ping hack. Firmware is in Program Files/tftp32 directory as well as the rf file. TFTP32 is set to use the previously mentioned directory as root. I have already successfully ping hacked to unlock the console.

Two suggestions are:
1. Disconnect from internet and hard reset your router before doing this.
2. Make sure the script "rf" is using unix style line terminator ("0Ah" only) at the end of each line. (notice that windows programs using "0Ah 0Dh" as line break)
reply

Phoenix2088 @ 14th Sep 07:42PM:
Re: [Unlock] WRTP54G with Firmware 5.01.04

Thanks. I redid the script using Unix syntax and that sort of worked. I saw TFTP32 transfer the file over to the router successfully.

However the power light did not blink on the WRTP54G and even after a power cycle and hard reset the device is still running 5.01.04. It feels like I am very close, any help would be greatly appreciated.
reply

anon @ 15th Sep 03:56AM:
Re: [Unlock] WRTP54G with Firmware 5.01.04

I guess that you missed an 0AH at the end of the rf file...
reply

Phoenix2088 @ 15th Sep 05:58PM:
Re: [Unlock] WRTP54G with Firmware 5.01.04

Even wrote the script in Ubuntu, same problem. Not sure what I am doing wrong.
reply

jetzhu @ 16th Sep 09:33PM:
Re: [Unlock] WRTP54G with Firmware 5.01.04

which firmware are you using for your WRTP54? »httpconfig.vonage.net/wrt-11.1.0···327.img?

Notice that the RTP300 is using different file
»httpconfig.vonage.net/rt-11.1.0-···0327.img
reply

Phoenix2088 @ 16th Sep 11:30PM:
Re: [Unlock] WRTP54G with Firmware 5.01.04

That was it! Thanks so much for the help. This doorstop is now useful. :D

I'm going to post a tutorial with all the steps to help make it easier for n00bs like me. Once again, thanks to everyone for the help.

Here it is: »[Unlock] TUTORIAL: VONAGE WRTP54G/RTP300 WITH 5.01.04
reply

ogdensburg @ 16th Sep 11:58PM:
Re: [Unlock] WRTP54G with Firmware 5.01.04

Tried to upgrade the firmware. For some reason,the upgrade failed and now my WRTP54G power light keeps blinking. Anyway to recover it?
reply

Phoenix2088 @ 17th Sep 01:11AM:
Re: [Unlock] WRTP54G with Firmware 5.01.04

It blinks for about 2-3 minutes. If the power continues to blink, try doing a hard reset (paper clip for 10-15 seconds).
reply

ogdensburg @ 18th Sep 06:14PM:
Re: [Unlock] WRTP54G with Firmware 5.01.04

No luck. Still blinking.

said by Phoenix2088 :

It blinks for about 2-3 minutes. If the power continues to blink, try doing a hard reset (paper clip for 10-15 seconds).

mazilo @ 18th Sep 07:36PM:
Re: [Unlock] WRTP54G with Firmware 5.01.04

said by ogdensburg :

Tried to upgrade the firmware. For some reason,the upgrade failed and now my WRTP54G power light keeps blinking. Anyway to recover it?

Use a serial-console cable to flash the unit with a legitimate firmware to recover this. You did enable CONSOLE_UNLOCK option when the device was working, right? Otherwise, you will probably need to ask someone to dump the whole Flash using a JTAG cable, modify the S/N and MAC Addresses, then upload to your WRTP54G using aJTAG cable. This may take more than 40 hours using an unbuffered JTAG cable.
--
Mazilo always prays for FREEBIES!
US Phone: +1-678-601-0907
UK Phone: +44-703-194-2574

reply

GrauerFuchs @ 19th Sep 03:09PM:
Re: [Unlock] WRTP54G with Firmware 5.01.04

said by mazilo :

Otherwise, you will probably need to ask someone to dump the whole Flash using a JTAG cable, modify the S/N and MAC Addresses, then upload to your WRTP54G using aJTAG cable. This may take more than 40 hours using an unbuffered JTAG cable.

If the light is flashing, then the bootloader is still valid. If I do recall, if pspboot fails to boot, it will drop to a prompt regardless of the CONSOLE_STATE setting. If not, a simple JTAG wipe of the environment variable section (addr 0xb0010000 length 0x10000) will release the console on most devices. If, in the process, the desire is to make it entirely NA, simply use JTAG to flash the modded 64k pspboot bootloader in, wipe the above-mentioned environment space, and forget about the firmware images. The bootloader alone will take about 25 minutes if all goes well. Once the new pspboot is in place, it can accept and quickly flash the Linksys-provided NA firmware in less than 5 minutes. Then, there's no question about it reverting to a locked state, either.
reply

shycharles @ 18th Oct 03:49AM:
Re: [Unlock] WRTP54G with Firmware 5.01.04

I am a newbie in the Voip Unlocking world. You are telling the entire process, step by step marvelously. One thing you miss though is whether the device from Vonage (in my case RTP300) will be opened and we will be able to see the entire page with User id & Password, domain and port OR does this process wash every setting that was made by the provider and once we do it, we will just be able to use this device with other providers and not (or maybe) with Vonage? I understand your concern about legalities, which do not bother me as such. All I want to do it to be able to see the following:
User ID (generally 1+my Vonage phone number)
Password
Domain
Port (generally 5060 or 5061)
My Firmware version is 5.01.04 or maybe 5.01.14, basically it is the latest firmware.
reply