[Equipment] Routing configration

[Equipment] Routing configration
Links: home · search · speed test · login · more ·

Links: Reply New Topic
Forums » Voice Over IP - VOIP » AT&T CallVantage » [Equipment] Routing configration

anon @ 11th Mar 04:14PM:
[Equipment] Routing configration

I am able to access the NAS Drive on my home network, however unable to do so over the Internet. My current configuration is:

Cable Modem > TA D-Link 5102S > Belkin Wireless Router > NAS

Is it possible to change the configuration as follows and if so what changes would I have to make on the TA properties:

Cable Modem > Belkin Wireless Router > TA D-Link 5102S

Thanks in anticipation....any suggestions would be greatly appreciated.

SK
reply

Fisamo @ 12th Mar 09:18AM:
Re: [Equipment] Routing configration

No reason you can't do it. You shouldn't have to change the ATA properties since you have cable service (DHCP to pull down automatic IP address ,etc). It's highly unlikely that you'll have service issues in this configuration. BUT, you may find it helpful to forward some ports to the ATA: 5060-5061,5621,10000-20000 (all UDP).
reply

anon @ 12th Mar 09:28AM:
Re: [Equipment] Routing configration

Thanks....will give it a try!
reply