ZyXEL NBG-460N Page 2

ZyXEL NBG-460N Page 2
Links: home · search · speed test · login · more ·

Links: Reply New Topic
Forums » Hardware By Brand » ZyXEL » ZyXEL NBG-460N
page: 1 · 2
drahnier @ 4th Sep 04:09AM:
Re: ZyXEL NBG-460N

ZyXEL have just posted a new firmware: V3.60(AMX.5). Apparently, it features a new WLAN driver. For the first time, I can now use 802.11n without experiencing frequent disconnects.
reply

csayers @ 4th Sep 11:21PM:
Re: ZyXEL NBG-460N

downloaded and installed the NGB-460N AMX.5 on my x550N which has been gathering dust due to disconnects. I am happy to say that the new firmware has been stable for 10 hours with one VPN tunnel and SIP phone running on it.

search V3.60(AMX.5) for download site it is not on X550N page yet.

Note that when upgrading through the router page it appears to do nothing, just leave it on the page as it will take like 2-5 minutes before it starts to upload the .bin file.

I will report back in a few days as the previous firmware couldnt go more than 2 days before the wireless quit and the WAN went down.
reply

Dandemon @ 8th Sep 01:30AM:
Re: ZyXEL NBG-460N

For some reason I can't download the linked file from the Zyxel worldwide site. Could some kind soul please grab the release notes off the download and post the changes up here? Thanks in advance...

»www.zyxel.com/web/support_downlo···BG-460N#
reply

drahnier @ 9th Sep 06:38AM:
Re: ZyXEL NBG-460N

Unfortunately, even with the new firmware I experience disconnects when enabling N mode, however, they happen far less frequent.
reply

csayers @ 14th Sep 11:07PM:
Re: ZyXEL NBG-460N

Well it has been 10 days with the new 460 firmware loaded on my 550N, Not one drop, no disconnects for my VOIP box and one IPSEC tunnel running. Fantastic, finally This box lives up to the Zyxel name. One last problem to figure out and it is perfect. I cannot figure out how to let HTTPS and HTTP reach my Windows home server box. Using port forwarding doesn't seem to work, Anyone know any tricks? The firmware is different than my Zywall 35 and I cannot get this X550N to let my HTTP or HTTPS in.
reply

Dandemon @ 15th Sep 12:32AM:
Re: ZyXEL NBG-460N

csayers, I'm not sure you can specify firewall blockage by the kind of traffic.

On another topic... In Bandwidth Management, can you check the upload speed menu and see what speed setting options it gives you? Is it only MB/Sec or KB/Sec? I need to check whether they did what I asked...
reply

csayers @ 15th Sep 03:31AM:
Re: ZyXEL NBG-460N

Dandemon,
The first page shows Mbps but I think it was that way in the March firmware, I am not using the BWM feature but it still shows the VOIP class as using TCP when it should be UDP.

Also Dan, I want to open via NAT a port , not block the HTTP and HTTPS Traffic, is that more clear? Any ideas?
reply

Simonvetterl @ 16th Oct 12:58AM:
Re: ZyXEL NBG-460N

Hi
I also use NBG-460. Also I connect one Linksys PAP2 on it. But I have the problem, the nobody can reach me from outside. I have to set up port forwarding with udp. But how and where can I do it? And wich ports schould I take? port Nr 5060?

Kind Regards. Simon
reply

Dandemon @ 17th Oct 10:36AM:
Re: ZyXEL NBG-460N

I had a PAP2 connected to mine too, Simon. The trick is to enable PnP in the router and let the PAP2 navigate its own way through the firewall. Don't open up any ports or try to second-guess the router - you'll just get in the way!
reply

Simonvetterl @ 21st Oct 01:57AM:
Re: ZyXEL NBG-460N

Hi
Do You know, where I can set Re-Authentication on my PAP2?

Kind Regards.
reply