CYT Device: Unlocking Information
Links: home · search · speed test · login · more ·
Links: Reply New Topic
Forums » Voice Over IP - VOIP » VOIP Tech Chat » CYT Device: Unlocking Information
page: 1 · 2 · 3 · 4 ...14 · 15 · 16
rcilink @ 20th Aug 04:14PM:
CYT Device: Unlocking Information
I wanted to start a new thread here to help those who have a CYT-device and are trying to unlock and reuse it.
There are many CYT-flavored (TI AR7 chipset) devices.
Here are a few we know about:
- Linksys WRTP54G - 2 phone ports, 4 port router, wireless
- Linksys RTP300 - 2 phone ports, 4 port router
- Linksys PAP2 v2.0- 2 phone ports
- Vtech IP8100 - Cordless SIP phone with base
- Motorola VT2442 - 2 phone ports, 4 port router
- D-Link VTA-VR - 2 phone ports
- Linksys WAG54GP2 - 2 phone ports, DSL router
At this point, the cyt-unlocker being discussed in other threads will attempt to 'unlock' the device by changing the supervisor (Admin) password. The tool will also change all SIP settings to a generic default, making it ready for configuration by you.
As with many of these tricks, if you happen to factory reset the device, (most of the time) you will return all of the locked settings. This includes the factory setting of the Admin password.. it will be locked.
So, if you need to factory reset the device, just run the cyt-unlocker tool after the factory reset to re-unlock the device.
For those who are currently registered customers with a VoIP provider, this tool will not retain any of your account settings! In other words: do not use this tool if you are subscribing to a phone service! The device you are unlocking should not be registered with any service.
Current Version is: cyt 3.0 for Windows*
*See release notes in that file for currently supported devices.
As more devices are released with this chipset, newer versions will follow. From what I have heard, there has been talk about a web site going online to offer cleaner distribution of future updates.
The best support for owners of these devices is to use forums like this one.
reply
mazilo @ 23rd Aug 10:42AM:
Re: CYT Device: Unlocking Information
To add more to the above, please read this CYT Device Unlock FAQ. Thi is a a must to read if you own a Linksys PAP2 v2.0 and/or a DLink VTA-VR device.
Credits go to cron for the FAQ.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
DSLHeadaches @ 23rd Aug 11:39AM:
Re: CYT Device: Unlocking Information
I know it sounds stupid, and I've read about 2 hours through the various threads and haven't found the answer.
How do I obtain the IP Address of the PAP2 so that I can login while running CYT30 if I'm connecting between my PC and the PAP2 with a autosensing ethernet switch (as defined in the readme).
If I connect the PAP2 to my router, disconnecting the modem/Internet connection, then I can see the PAP2 IP address, can login to its web page, and can ping it. Attempts to run CYT30 in this configuration don't work, so I started to use the switch as defined in the CYT30 readme. Using the switch I cannot ping 192.168.15.1 or 192.158.1.5 (addresses suggested elsewhere). There is no DHCP, so how is the PAP2 obtaining the IP?
reply
rcilink @ 23rd Aug 11:45AM:
Re: CYT Device: Unlocking Information
On the pap2 v2.0, there is IVR support.
That is, you can hook a phone to the line1 port and dial *** to get a voice menu.
Once in that menu, dial 110 # to hear your IP address read to you.
reply
DSLHeadaches @ 25th Aug 09:06PM:
Re: CYT Device: Unlocking Information
Thanks rclink; however, since I have flashing power light, when I attach a phone to line 1 or 2 all I get is fast busy. There is no opportunity to access the IVR.
I'm a bit lost on the CYT30 readme, perhaps I just don't understand enough about networking. A switch, to my knowledge, has no methodology (NAT/DHCP) for assigning IP addresses. Thus when the readme is suggesting certain IP addresses, what is setting these? Do I need to install Internet Connection Sharing (ICS) on the desktop or do I specify for example the suggested IP addresses on the desktop (IPCONFIG?) and in the PAP2 configuration page (which currently is set to obtain IP). If I weren't using a switch and instead simply a cross-over cable I would have the same issue.
I am still able to login to the PAP2v2 by connecting it to my router (after unplugging the modem connection to avoid PAP2 connection to Vonage) and get to the config page. Running CYT30 in this setup (with my DHCP assigned IP) always results in the XML server starting, but nothing ever happens, it never comes back with a completion.
As an FYI, my PAP2 config page has a firmware version number like 1.0.13, yet I constantly see threads with firmware beginning with 3.x; am I missing something? Have I possibly created a door stop by doing a factory reset along the way?
I'm continuing to scan through the various threads on unlocking this beast. Perhaps I should use the original manual method of unlocking and forget about CYT30?
reply
mazilo @ 25th Aug 11:09PM:
Re: CYT Device: Unlocking Information
Factory reset your PAP2v2 and see if that will do the trick. Please don't say you don't know how to factory reset your PAP2v2. ;)
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
rcilink @ 25th Aug 11:33PM:
Re: CYT Device: Unlocking Information
said by DSLHeadaches :
I am still able to login to the PAP2v2 by connecting it to my router (after unplugging the modem connection to avoid PAP2 connection to Vonage) and get to the config page. Running CYT30 in this setup (with my DHCP assigned IP) always results in the XML server starting, but nothing ever happens, it never comes back with a completion.
Sounds like it is working.. I would suggest that for the duration of using CYT that you disable windows firewall. If you do not, the device can not talk to the CYT tool.
Let us know if that helps.
reply
DSLHeadaches @ 26th Aug 02:11AM:
Re: CYT Device: Unlocking Information
Factory Reset (hold reset button > 20 sec lights blink). Numerous attempts and no change in attempting to reach IVR. Either silence on line, a three rising tone, or fast busy; but no response to any of asterisk button and varying states of the above three states.
Turned off Norton Int Sec completely and no Windows Firewall (as done previously), reset Int Explorer security settings to Low on Internet and Local Low. Logged into PAP2 admin/admin. CYT30 changed to IP address which is used to access. XML server started, but never returns. Factory reset via reset button didn't help. Didn't try just the ethernet switch since obtaining the IP via IVR didn't seem possible. Did try changing PAP2 to hardcode the IP address assigned by router.
Perhaps I'll try CYT30 on another computer tomorrow.
reply
tpgopi @ 26th Aug 07:20PM:
Re: CYT Device: Unlocking Information
Did anybody successfully unlocked WRTP54G or RTP300 using this tool?
reply
DSLHeadaches @ 26th Aug 08:26PM:
Re: CYT Device: Unlocking Information
I was able to utilize another computer and CVT30 completed providing login info as designed. There must be some form of software blocking completion on my primary computer, the successful computer has almost nothing loaded.
I can now access the IVR, obtain IP and even have dialtone.
However, all attempts to login to Update or Voice_admin failed with "Error: User not allowed to login this user level" or "Bad User/Password". I've tried all sorts of combinations, power cycled the PAP2, tried normal login, followed by the /update page with no success (noting that it accepts the factory user/password at just the IP home page) and tried rerun CVT30 (all with internet diconnect). I'll keep trying...
reply
mazilo @ 26th Aug 08:49PM:
Re: CYT Device: Unlocking Information
said by DSLHeadaches :
However, all attempts to login to Update or Voice_admin failed with "Error: User not allowed to login this user level" or "Bad User/Password".
Once unlocked using CYT30 unlocker, use Admin/Admin combination to login to VM and/or perform firmware upgrade.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
DSLHeadaches @ 26th Aug 10:31PM:
Re: CYT Device: Unlocking Information
Thanks mazilo & rcilink, I'm in and able to use Internetcalls.com for callout. Trying to determine SIP inbound and whether it will work. Obtained copy of xml file with provisioning. Hoping to try skype using the SIP intermediary tool. Hoping to figure out best CODECs since Internetcalls has bad echo for callee, as others have mentioned. Tried setting Echo Cancellation, we'll see if that helps.
reply
mazilo @ 26th Aug 10:59PM:
Re: CYT Device: Unlocking Information
said by DSLHeadaches :
Hoping to try skype using the SIP intermediary tool.
I believe you will need also need asterisk to do this unless the intermediary tool (uplink?) can do this by itself, won't you?
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
nukleuz @ 28th Aug 02:07AM:
Re: CYT Device: Unlocking Information
i got it working too on the RTP300 trying to figure out what to use for incoming calls like how to get a number for incoming calls and all that.if anyone has been able to do that please let us know
thank you
reply
kgu2206 @ 28th Aug 08:42AM:
Re: CYT Device: Unlocking Information
Any lucky to unlock with D-Link VTA-VR device?
Thanks
reply
mazilo @ 28th Aug 09:47AM:
Re: CYT Device: Unlocking Information
said by nukleuz :
i got it working too on the RTP300 trying to figure out what to use for incoming calls like how to get a number for incoming calls and all that.
Check out StanaPhone.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
nukleuz @ 28th Aug 01:07PM:
Re: CYT Device: Unlocking Information
ok thnx
reply
kenjreno @ 29th Aug 07:42PM:
Re: CYT Device: Unlocking Information
I'm trying to see if the CYT has been able to Unlock a VTec 8100. BB had them on clearance here for $40 for the 8100-2, and I would like to get them configured for my Asterisk Box.
Every time I try it, i get the message that I must be logged into the unit. I'm logged in, and have it pointing to the correct address, but still no luck getting it to reset the information. Any help would be great. I can even help test the unlocking if that is also a possibility.
reply
rcilink @ 29th Aug 07:44PM:
Re: CYT Device: New Release : v3.3+ includes Motorola vt2442 !!
It looks like a new version of CYT is ready for release..
News about this release:
- Includes support for Motorola VT2442 (and similar ?) units.
Who knows.. maybe it will just work with D-Link VTA-VR too? ;)
reply
anon @ 29th Aug 10:09PM:
Re: CYT Device: New Release : v3.3 includes Motorola vt2442 !!
" Who knows.. maybe it will just work with D-Link VTA-VR too? "
I knew it is coming soon..because I saw you bought a VTA-VR on e-Bay.. ;)
reply
RonR @ 29th Aug 10:32PM:
Re: CYT Device: Unlocking Information
Kaspersky AntiVirus is very unhappy with the latest file:
Kaspersky Anti-Virus 6.0
The requested URL »/r0/download/1···in32.zip is infected with Trojan-PSW.Win32.LdPinch.aux virus
Anyone else getting warnings?
reply
rcilink @ 29th Aug 10:33PM:
Re: CYT Device: Unlocking Information
said by RonR :Kaspersky AntiVirus is very unhappy with the latest file:
Kaspersky Anti-Virus 6.0
The requested URL »
/r0/download/1···in32.zip is infected with Trojan-PSW.Win32.LdPinch.aux virus
Anyone else getting warnings?
Interesting.. I will scan here and see what comes up.. Hopefully nothing, but will do that just to make sure as well.
EDIT: I just completed the full virus-scan and it did not show anything.. I am hoping that your software shows it as false-positive.. Anyone else see this problem with cyt?
reply
rcilink @ 30th Aug 12:37AM:
Re: CYT Device: Unlocking Information
I have no idea why the cyt33 was triggering your AV.. According to google, that trojan is brand new. Since I have used the program here, I did a thorough scan and did not find anything to report.
Anyhow, here is a cleaned-up version that (maybe) includes d-link VTA-VR support.. someone should test it and verify that for us.
Also, this version has a preview of an upcoming menu... It will (soon) let you make changes to the XML using cyt. There are many settings that are not shown on the web interfaces of these devices. What better way to access those settings? (it gives you a sneak-peak for now, does not let you make changes at this time)
EDIT: The cyt_3.4 version has been removed-- it has a port error, preventing it from doing anything. It has been corrected, and re-packaged as cyt_3.5. If you downloaded the 3.4 release, please re-download this link (updated to 3.5).
reply
myvoip07 @ 30th Aug 12:52AM:
Re: CYT Device: Unlocking Information
said by rcilink :
Anyone else see this problem with cyt?
Checked both versions with norton and nada here..
reply
myvoip07 @ 30th Aug 12:56AM:
Re: CYT Device: Unlocking Information
said by rcilink :
Also, this version has a preview of an upcoming menu... It will (soon) let you make changes to the XML using cyt. There are many settings that are not shown on the web interfaces of these devices. What better way to access those settings? (it gives you a sneak-peak for now, does not let you make changes at this time)
Execellent job. Sweet, just did a preview and looks cool..
reply
elvisk @ 30th Aug 01:31AM:
Re: CYT Device: Unlocking Information
I just tried it on the Dlink and it gets "failed to connect to device." Should I have provisioned it first? I did unlock it but reset to defaults to try out the cyt_34 version. I think it's getting closer to working. Let me know if I can test it more.
EK
reply
RonR @ 30th Aug 02:28AM:
Re: CYT Device: Unlocking Information
said by rcilink :
I have no idea why the cyt33 was triggering your AV.. According to google, that trojan is brand new.
I don't know either, but cyt34 came down without KAV squealing like a pig (literally). It must be a false positive with this new trojan. Fortunately, KAV definitions are updated every four hours, so it'll probably get straightened out fast.
Thanks a bunch!
reply
jwx213 @ 30th Aug 06:52AM:
Re: CYT Device: Unlocking Information
Hi,
Tried CYT 3.4 with D-Link VTA-UV. Detects, gets dots while trying to connect then fails.
Done it with box non-provisioned and provisioned.
Looking good mind!
reply
rcilink @ 30th Aug 07:28AM:
Re: CYT Device: Unlocking Information
Note the updated version of cyt (now 3.5) above..
A port setting was incorrect in 3.4, making it never see the device. oops.
This is fixed in version 3.5
So, if someone cant test the DLINK option, that would be great.
Link to CYT version 3.5: Cyt_35_Win32.Zip
reply
tastyratz @ 30th Aug 09:16AM:
Re: CYT Device: Unlocking Information
FWIW I tried version 33 on my vonage pap2 2.0 and it did not work. It gave me a successful message and thought it worked, but after some time and power cycling still no actual results. I switched back to 30 and was able to unlock however so perhaps something changed?
reply
SteveLV702 @ 30th Aug 12:01PM:
Re: CYT Device: Unlocking Information
grr this totally sucks this program doesn't work for me either cause you have to open the web gui and mine is disabled and tried to enable it via the IVR but it asks for the admin password which I do not know... :'(
reply
mazilo @ 30th Aug 01:35PM:
Re: CYT Device: Unlocking Information
said by SteveLV702 :
grr this totally sucks this program doesn't work for me either cause you have to open the web gui and mine is disabled and tried to enable it via the IVR but it asks for the admin password which I do not know... :'(
Factory reset your device and don't let it connect to the Internet.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
SteveLV702 @ 30th Aug 01:46PM:
Re: CYT Device: Unlocking Information
kind of hard to do when there is no factory reset button and when you try to do it via the IVR it asks for the admin password which I do not know...
reply
rcilink @ 30th Aug 02:47PM:
Re: CYT Device: Unlocking Information
It is sounding like you are talking about the original Linksys PAP2 device. Sorry to say, the original PAP2 does not work with the CYT program.
Probably about one month ago, Linksys PAP2 v2.0 started to show-up on the shelves at stores around the country. Even though it is labeled "Linksys PAP2 v2", it is really a completely different beast inside. That is why the v2 version works with the CYT program.
The v2 version of the PAP2 does indeed have a reset button. Holding it in for the 30sec to 1 minute timeframe will actually factory default the device.
One option you have, if your purchase was recent, would be to return it and look for the "v2" version of the PAP2. The PAP2 box has a silver stripe on the top-front for v2. (The original has orange stripe)..
New packaging looks like this:
and... Old packaging looks like this:
reply
SteveLV702 @ 30th Aug 02:52PM:
Re: CYT Device: Unlocking Information
well on the device it says v2
reply
SteveLV702 @ 30th Aug 03:07PM:
Re: CYT Device: Unlocking Information
Here is picture of our boxes. sorry bad quality was taken with my cell phone in a somewhat dark room.
reply
jwx213 @ 30th Aug 04:41PM:
Re: CYT Device: Unlocking Information
Working PERFECTLY on the D-Link VTA-UV's ive got!
Got someone looking at getting Linksys PAP2 v2 firmware on the D-Link to get all the nice menu options back that you need for easy config.
Will let you know what he finds. :D
reply
mazilo @ 30th Aug 06:05PM:
Re: CYT Device: Unlocking Information
said by SteveLV702 :
kind of hard to do when there is no factory reset button and when you try to do it via the IVR it asks for the admin password which I do not know...
A PAP2v2 has a built-in reset PIN hole to do a factory reset. If yours don't have a reset PIN hole on the side panel and above Phone1 port, then it is either an ordinary PAP2 or a PAP2T (if this one also has no reset PIN hole, too).
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
mazilo @ 30th Aug 06:08PM:
Re: CYT Device: Unlocking Information
said by SteveLV702 :
Here is picture of our boxes. sorry bad quality was taken with my cell phone in a somewhat dark room.
Those boxes looked like PAP2v2. Please confirm the MAC address of on the BOXes with the ones on the back panels of your PAP2v2 units. They should match. Then, there should be a reset PIN hole on the left side panel above Phone1 port. You may need a magnifying glasses to see.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
SteveLV702 @ 30th Aug 06:09PM:
Re: CYT Device: Unlocking Information
Its a PAP2-NA version 2 it has no reset button/hole anywhere on the outside of the device or on the inside of the device. It shows date made was 03/2006
reply
mazilo @ 30th Aug 06:10PM:
Re: CYT Device: Unlocking Information
said by jwx213 :
Got someone looking at getting Linksys PAP2 v2 firmware on the D-Link to get all the nice menu options back that you need for easy config.
I would suggest to have a serial cable ready in case the modded firmware causes your PAP2v2 to brick!
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
SteveLV702 @ 30th Aug 06:22PM:
Re: CYT Device: Unlocking Information
fine can you look at the picture below and point out where this hidden reset button should be.. So maybe open up in "paint" and draw a arrow pointing to where the reset button should be :)
reply
rcilink @ 30th Aug 06:32PM:
Re: CYT Device: Unlocking Information
If your PAP2 v2 was of the latest flavor (TI chip inside), it would have a reset button, as shown.
My guess would be that those are Linksys PAP2 units, based on the Sipura model. That is similar (if not the same) to the original Linksys PAP2 unit.
Out of curiousity, can you dial into the IVR (***) and then check what firmware it is using?
reply
SteveLV702 @ 30th Aug 06:45PM:
Re: CYT Device: Unlocking Information
firmware is 3.1.8
reply
mazilo @ 30th Aug 08:07PM:
Re: CYT Device: Unlocking Information
said by SteveLV702 :
firmware is 3.1.8
I have opened up several PAP2v2 and they all had v1.00.13 firmware. See the right=hand corner on attached picture where it shows firmware version of 1.00.13.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
SteveLV702 @ 30th Aug 08:41PM:
Re: CYT Device: Unlocking Information
well my ivr says 3.1.8 I don't have a web gui so can't verify that way.
reply
mazilo @ 30th Aug 09:42PM:
Re: CYT Device: Unlocking Information
said by SteveLV702 :
well my ivr says 3.1.8 I don't have a web gui so can't verify that way.
Unlike a PAP2, a PAP2v2 MAC address starts out with 0018. I know you already mentioned your PAP2v2 has a V2 on it somewhere, can you look very carefully again to see if there is a written PAP2V2 on the back of your device? Also, if you look from the front side, where can the Cisco logo be found? BTW, on your post where you mentioned it's a PAP2-NA version 2 it has no reset button/hole anywhere on the outside of the device or on the inside of the device. Which device did you refer to as a PAP2-NA v2?
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
SteveLV702 @ 31st Aug 12:25AM:
Re: CYT Device: Unlocking Information
well all 3 of mine MAC Address starts out at 0016 and regardin g the cisco logo its on the oposite end from the popoff cover for where the feet go.
and PAP2-NA v2 are the only device I have
and on bottom of device it says
Model No: PAP2-NA v2
reply
jwx213 @ 31st Aug 04:32AM:
Re: CYT Device: Unlocking Information
He is sorting out the serial cable before he starts, its beyond me so im letting him have a crack at it!
His D-Link box turned up this morning so we will wait and see... :)
reply
mazilo @ 31st Aug 08:16AM:
Re: CYT Device: Unlocking Information
said by SteveLV702 :
and PAP2-NA v2 are the only device I have
and on bottom of device it says
Model No: PAP2-NA v2
I am lost here. I thought you want to find out if you had a PAP2v2, didn't you? If so, your last chance is to open up the box, look inside, take some snapshots of inside view (this time please post some nice pictures!), and tell us what you see.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
rcilink @ 31st Aug 09:58AM:
Re: CYT Device: Unlocking Information
The serial interface needs a 3.3v converter chip (something like a MAX232) to be able to hook it to a PC.
On similar TI-chip'd products, I must say, it works nicely :)
Beware, the firmware for these devices (and similar-branded versions) all require a login password on the serial console..
But, there is LOTS of great information on the console if you are debugging or testing something.
One last thing.. make sure to change CONSOLE_STATE to 'unlocked' in /proc/ticfg/env
This will let you get into the PSP bootloader, and do an emergency firmware upload without letting the router boot (in case you brick the firmware)..
reply
jwx213 @ 31st Aug 10:36AM:
Re: CYT Device: Unlocking Information
I think this will be the ideal way for us to get the settings easily changeable through the web interface.
I have forwarded all your comments onto him from the above post. :) Thanx
Have you tried crossing the Firwares over on the D-Link and Linksys?
reply
SteveLV702 @ 31st Aug 12:00PM:
Re: CYT Device: Unlocking Information
no mazilo I said I have a PAP2-NA V2 I am just trying to get it unlocked. By default its unlocked by IonoSphere.net put in an admin password and disabled the webgui so now its locked. And since I dont see any reset button I can't even reset it..
I'll take some pictures of the inside but nice pictures I doubt that since my digital camera battery is totally shot to hell. So as of right now I can only take pictures with my cell phone.
reply
SteveLV702 @ 31st Aug 12:45PM:
Re: CYT Device: Unlocking Information
but anyway as of now I am going to go try this on my old vonage Motorola VT2442 Router. Afterwords where do I go to access the voice setttings?
reply
rcilink @ 31st Aug 12:50PM:
Re: CYT Device: Unlocking Information
In Motorola, SIP settings are under the ADVANCED tab..
reply
SteveLV702 @ 31st Aug 12:59PM:
Re: CYT Device: Unlocking Information
well this tool doesn't work for the Motorola VT 2442 either as I logged into the webgui via »192.168.15.1 Username: router Password: router and then ran the CYT Program and pressed 3 and entered the IP 192.168.15.1 and then did 1 and comes back saying something about some Security Access Violation that I need to login via my web browser which I already did.
reply
rcilink @ 31st Aug 01:12PM:
Re: CYT Device: Unlocking Information
which version of cyt are you using..?
only version 3.5 or newer will work with the motorola and d-link models.
Click this link to download CYT version 3.5 for windows.
reply
SteveLV702 @ 31st Aug 01:24PM:
Re: CYT Device: Unlocking Information
okay I was running 3.0 but I downloaded the 3.5 and still isnt working still giving me security access violation need to login via browser even though I already am.
reply
rcilink @ 31st Aug 01:27PM:
Re: CYT Device: Unlocking Information
said by SteveLV702 :
okay I was running 3.0 but I downloaded the 3.5 and still isnt working still giving me security access violation need to login via browser even though I already am.
What does it report on your screen (look at the bottom-right of the screen) for the Device: identification?
reply
SteveLV702 @ 31st Aug 01:32PM:
Re: CYT Device: Unlocking Information
dont see anything about Device: identification
attached is a screen shot
reply
SteveLV702 @ 31st Aug 02:41PM:
Re: CYT Device: Unlocking Information
rcilink I got your PM and that worked I am now able to login via Username: Admin Password: admin on the Motorola VT2442 only problem is when I click on the Advanced Tab there is now a Voice Option but when I click it it only allows me to Enable/Disable Voice. And then there is Voice Provisioning Option but it only allows me to change the Provisioning Server . I do not see anywhere where I can change the SIP Settings for Line1 or Line2. :'(
reply
kenjreno @ 31st Aug 09:47PM:
Re: CYT Device: Unlocking Information
Well, using the newest CYT 3.5 I was able to unlock my IP8100, and then get the codes needed to download the XML from Vonage. Using that file, I was able to get the original user and admin passwords, and then modified the XML, and uploaded the new file with my SIP changes, and now I can connect to my Asterisk PBX
reply
mazilo @ 31st Aug 10:44PM:
Re: CYT Device: Unlocking Information
said by kenjreno :
I was able to get the original user and admin passwords,
Those are passwords set by Vonage and not the originals (factory default values). Otherwise, we are home free from factory resetting our PAP2v2 and use the admin password to access its SIP menus.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
anon @ 1st Sep 02:24PM:
Re: CYT Device: Unlocking Information
any chance this can work with the wrt54gp2 that is discontinued?
reply
rcilink @ 1st Sep 06:45PM:
Re: CYT Device: Unlocking Information
said by usera :
any chance this can work with the wrt54gp2 that is discontinued?
Nope.. sorry.
The RT31P2 and WRT54GP2 are a different processor (not TI processor). No worky with cyt.. :(
reply
simpleman21 @ 1st Sep 07:38PM:
Re: CYT Device: Unlocking Information
I am getting security voilation errors when I try to chose option 1 with CYT 3.5 on Motorola VT2442. Eventhough i am connected to vt2442. Any idea on this.
Thanks
reply
SteveLV702 @ 2nd Sep 12:20PM:
Re: CYT Device: Unlocking Information
okay here are pictures of the inside of the PAP2-NA's I took pictures from ALL sides.
reply
rcilink @ 2nd Sep 04:12PM:
Re: CYT Device: Unlocking Information
For the time being...
To unlock the Motorola 2442, run like this:
CYT35.EXE MOTO
The 'MOTO' on the end will help it out..
enoy!
reply
SteveLV702 @ 2nd Sep 04:40PM:
Re: CYT Device: Unlocking Information
I just went and purchased a Vonage PAP2 from CircuitCity and I was able to unlock it via the CYT program now just have a question when I login too »IP/Voice_adminPage.html with Admin/Admin all I get is a SIP, Line1, Line2, Common Codes Tabs where can I disable Auto-Provisioning or change the provision server?
Also how can I open it up cause when I remove the two rubber feet it has some weird Screws.
reply
mazilo @ 2nd Sep 05:34PM:
Re: CYT Device: Unlocking Information
To access your PAP2v2 Provision page, point your web browser to http: //[PAP2 IP Address]/cgi-bin/webcm?getpage=/usr/www_safe/html/voice/Provision.html. There is no enabled/disabled button for Provision.
If you have your PAP2v2 unlocked with CYT Unlocker program, you will see the Current Provisioning Profile URL field points to 127.0.0.1. If you want to play safe, save a copy of the Default Encryption Key for future use in case if it gets re-locked by Vonage. For even a safer approach, disable I/O traffics from/to any Vonage sites on your router. I use the following two IPTABLES rules to block I/O traffics from/to 69.59.0.0 and 216.115.0.0 subnet (locations of Vonage servers) on my Linksys WRT54GS v3 router with DD-WRT v23 SP1 firmware:
iptables -I FORWARD -d 69.59.0.0/16 -j DROP
iptables -I FORWARD -d 216.115.0.0/16 -j DROP
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
SteveLV702 @ 2nd Sep 05:37PM:
Re: CYT Device: Unlocking Information
well my router is a WRTP54G-NA and dont know how to block sites...
reply
mazilo @ 2nd Sep 07:18PM:
Re: CYT Device: Unlocking Information
said by SteveLV702 :
well my router is a WRTP54G-NA and dont know how to block sites...
Can you SSH into your router to see if it has iptables program? If so, you can temporarily run this program until the next power cycle/reboot.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
SteveLV702 @ 2nd Sep 07:34PM:
Re: CYT Device: Unlocking Information
I tried to SSH into my router and it just closes the window really fast.
reply
myvoip07 @ 2nd Sep 08:32PM:
Re: CYT Device: Unlocking Information
said by SteveLV702 :
I tried to SSH into my router and it just closes the window really fast.
You may have to enable ssh at-least we have to on the wrt54[g/s] with 3rd party firmware. Open a web browser and see if you can http: //RoutrIP and check the option under Administration, that's where it is on wrt54[g-s]
Can someone who owns WRTP54G-NA comment on this?
reply
SteveLV702 @ 2nd Sep 08:40PM:
Re: CYT Device: Unlocking Information
Well under the Administration Port only option is
Remote Router Access and only option is Web Enabled/Disabled and a Port.
I even clicked on Voice and went there every tab and no option for SSH or Shell or anything. :'(
reply
mazilo @ 2nd Sep 09:13PM:
Re: CYT Device: Unlocking Information
said by myvoip07 :
You may have to enable ssh at-least we have to on the wrt54[g/s] with 3rd party firmware. Open a web browser and see if you can http: //RoutrIP and check the option under Administration, that's where it is on wrt54[g-s]
Can someone who owns WRTP54G-NA comment on this?
IIRC, Linksys has removed dropbear support from the WRTP54G-NA firmware. If your WRTP54G-NA runs on the latest -NA firmware, I am afraid you won't be able to SSH to your router.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
meister_sd @ 2nd Sep 09:41PM:
Re: CYT Device: Unlocking Information
said by SteveLV702 :
okay here are pictures of the inside of the PAP2-NA's I took pictures from ALL sides.
This is the PAP2 not the PAP2V2. To unlock this you need to goto the PAP2 unlocking guide.
The PAP2 uses the ESS chip, as you have. The new PAP2V2 uses the TI chip and has a totally differnt layout.
reply
SteveLV702 @ 2nd Sep 09:52PM:
Re: CYT Device: Unlocking Information
meister_sd already tried the PAP2 Unlocking Guide and don't work cause you need access to the web gui which I dont have access too :'(
reply
mazilo @ 2nd Sep 10:23PM:
Re: CYT Device: Unlocking Information
said by SteveLV702 :
meister_sd already tried the PAP2 Unlocking Guide and don't work cause you need access to the web gui which I dont have access too :'(
So, you thought CYT Unlocker will do the trick on your PAP2, right? As already explained in several posts here in this thread, the CYT Unlocker is a (universal) unlocking program for ATA devices based on a TI-AR7 platform. Neither PAP2 nor PAP2T (or PAP2v3) is based on a TI-AR7 platform.
If you really want to unlock your PAP2, you will have to go back to read and REALLY understand posts on PAP2 unlocking guide or find someone who is willing to help you to unlock and/or even completely reset your PAP2. I believe I once had offered to trade-in my virgin PAP2 (still sealed in its box) with someone's locked PAP2-NA here. If that someone wasn't you, the offer is still good for that person as well as for you. TBH with you, this really is not a good deal for me; however, since your unit is a PAP2-NA, I will be more than willing to sacrifice a virgin PAP2 (runs on firmware below v3.1.7 since it was bought before 9/26/5 -- before the unlocking procedure was out) for a locked PAP2-NA mainly because I want to investigate and study how a PAP2-NA bypasses its locking mechanism. I don't expect anything in return, except your gratitude of paying the S/H for both devices. In this case, it may cost you more than $10. You may also want to consider that a PAP2/PAPv2 (don't know if it still) can be had for as little as $10 from a local BB store after the instant $50 GC promotion. The only difference here is the PAP2 from BB is flashed with a firmware v3.1.9 and/or newer whereas mine is still below v3.1.7. Anyway, I just hope you will be able to unlocked your PAP2-NA and don't have to through this kind of tedious exchanges and/or buying a new one.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
SteveLV702 @ 2nd Sep 10:31PM:
Re: CYT Device: Unlocking Information
ya I went to buy a PAP2 from BestBuy but they only have the version 1's but I got a Version 2 today from Circuit City and it was the very last one they had... So now just need 2 more :)
reply
mazilo @ 2nd Sep 11:24PM:
Re: CYT Device: Unlocking Information
said by SteveLV702 :
ya I went to buy a PAP2 from BestBuy but they only have the version 1's but I got a Version 2 today from Circuit City and it was the very last one they had... So now just need 2 more :)
You should have gotten at least a unit of PAP2 to replace your locked PAP2-NA.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
SteveLV702 @ 3rd Sep 09:44AM:
Re: CYT Device: Unlocking Information
Well as I said I did get one from CircuitCity to replace one of my Locked PAP2-NA's only thing is BestBuy didn't have any of the version 2's and Circuit City only had one.. And I don't know of any other Electronic Stores in the area that would carry them.. And I need 2-3 more.
reply
SteveLV702 @ 3rd Sep 01:43PM:
Re: CYT Device: Unlocking Information
okay got 2 more and got all 3 of them unlocked now how can I set my own Voice Section Admin Password?
reply
meister_sd @ 3rd Sep 01:55PM:
Re: CYT Device: Unlocking Information
said by SteveLV702 :
okay got 2 more and got all 3 of them unlocked now how can I set my own Voice Section Admin Password?
First, login as Admin and then click the System tab. There you can set the user and admin PWs
Oops, I think you are talking about the PAP2V2. To do the V2, you have to make a config file and feed it to your device. Follow the steps for the rtp300/wrtp54g in the vonage forum. Since you have access to the provisioning page, make sure the provisioning keys (decryption keys) field is blank. Then you can feed it plain text XML
reply
SteveLV702 @ 3rd Sep 02:07PM:
Re: CYT Device: Unlocking Information
hmm darn I dont know how to make XML or how to feed it to it :'(
reply
rcilink @ 3rd Sep 06:46PM:
Re: CYT Device: Unlocking Information
From what I can tell you, stay tuned!
A new and improved version of cyt is coming! It has a built-in friendly XML builder. You just fill in the blanks, and it feeds to your device. Nice option.
More to come!
reply
jsb825 @ 5th Sep 05:52PM:
Re: CYT Device: Unlocking Information
Hello the cyt35.exe where can I download this to unlock a vta-cv box?
Thanks!!
Jim
reply
SteveLV702 @ 5th Sep 06:42PM:
Re: CYT Device: Unlocking Information
jsb825 its already in this threat on line page 2 or maybe 3 but here is the link again:
»/r0/download/1···in32.zip
reply
rcilink @ 7th Sep 03:20PM:
CYT 3.9c available for use.
New feature: you can change the Admin and/or user password(s)... No longer are you stuck with the default passwords.
The config (xml) editor is in the works.. some more work scheduled to be done on it before useful release.
reply
SteveLV702 @ 7th Sep 06:20PM:
Re: CYT Device: Unlocking Information
thanks works perfectly.. Cant wait until can change the SIP Settings in the vt2442 though :)
reply
zafark185 @ 10th Sep 11:12AM:
Re: CYT 3.9c available for use.
I try to use on my wrtp54g with 3.1.14 erthlink not worcking any one can helph me with step by step I try my best but no work if any one con helph me on phone 662-255-XXXX thanks
Mod note: Phone number obscured, people can contact you via PM through the site.
reply
anon @ 10th Sep 10:59AM:
msg deleted
deleted by a moderator
reply
anon @ 10th Sep 11:10AM:
msg deleted
deleted by a moderator
reply
mrvoice @ 11th Sep 12:21AM:
Re: CYT Device: Unlocking Information
I'm running 6.0 and no problem here. Downloaded, extracted, and ran without interuption.
reply
mrvoice @ 11th Sep 12:25AM:
Re: CYT Device: Unlocking Information
I thought the PAP2-NA is unlocked by default. I do know service providers will ship the pap2-na and lock you out. Voicepulse does this for instance. Though I have Never seen a PAP2-NA on a retail shelf. I'm not seeing alot of PAP2's anymore, but the earthlinks are flooding the shelves. I wonder what Earthlink's policy is after you cancel their service? Will they let you unlock the box?
Anyway, that is my 2 cents on the NA version. makes sense to me.
reply
mazilo @ 11th Sep 06:21AM:
Re: CYT Device: Unlocking Information
said by mrvoice :
I'm running 6.0 and no problem here.
The latest CYT is v3.9c. What is 6.0 you mentioned here?
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
SteveLV702 @ 11th Sep 08:28AM:
Re: CYT Device: Unlocking Information
it is unlocked by default but Ionosphere.net shipped them to me locked.
reply
rcilink @ 11th Sep 08:54AM:
Re: CYT 3.9c available for use.
said by zafark185 :
I try to use on my wrtp54g with 3.1.14 erthlink not worcking any one can helph me with step by step I try my best but no work...
Zafark185: contact me by sending rcilink PM.. I am looking for someone who has a WRTP54G-ER that is no longer using Earthlink voice services. If this is you, please contact me.
reply
zafark185 @ 11th Sep 10:15AM:
Re: CYT 3.9c available for use.
contact me by sending rcilink PM.. I am looking for someone who has a WRTP54G-ER that is no longer using Earthlink voice services. If this is you, please contact me
it is new or no longer using with earthlink if u want i can give to u u can contact by phone or by mail zafarullah185 with gmail.com
reply
mazilo @ 11th Sep 10:55AM:
Re: CYT 3.9c available for use.
said by zafark185 :
it is new or no longer using with earthlink if u want i can give to u u can contact by phone or by mail zafarullah185 with gmail.com
That will the best way to do to donate your unused equipment for the benefit of hacking. I am sure rcilink will be more than happy to hear this. ;)
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
SteveLV702 @ 11th Sep 10:58AM:
Re: CYT Device: Unlocking Information
can someone help me.. I am trying to use Ethereal to monitor my RT31P2 so I can find the TFTP or HTTP URL it uses to get updated firmware and .xml configuration file so then I can do a spoof dns server so I can unlock my RT31P2 but I am new with Ethereal and I have tried it with Viatalk WRTP54G-NA, Viatalk PAP2-NA, Vonage PAP2v2, Ionosphere.net RT31P2 but doesnt show any TFTP or HTTP on ANY of them.. So obviously doing it wrong.. So could someone walk me through it step-by-step?
reply
biomesh @ 11th Sep 12:19PM:
Re: CYT Device: Unlocking Information
Try tethereal,(aka tshark) the text based version of ethereal.
Run "tethereal -D" to get the list of interfaces, then run
tethereal -i INTERFACE-NUMBER -f "port 69"
to capture tftp traffic
reply
floriantet @ 11th Sep 12:50PM:
Re: to SARO91201
Could it be that your devices have only manual DNS (fixed IP for voice DNS server) and since there is no reply from DNS server, there is no request for the configuration file ?
The device needs first to find the IP of the configuration server before actually requesting a file from that server.
Have you seen any request for a DNS server in Ethereal log ?
reply
SteveLV702 @ 11th Sep 12:55PM:
Re: CYT Device: Unlocking Information
no haven't seen any request for a DNS Server....
C:\Program Files\Wireshark>tshark -D
1. \Device\NPF_GenericDialupAdapter (Generic dialup adapter)
2. \Device\NPF_{F3CFF75A-9636-4E90-A28A-A00358A6F8F3} (Bluetooth PAN Driver (Mic
rosoft's Packet Scheduler) )
3. \Device\NPF_{DE601AFC-E44C-44F7-801D-DB4A959A4C38} (Broadcom NetXtreme Gigabi
t Ethernet Driver (Microsoft's Packet Scheduler) )
4. \Device\NPF_{9719C77D-73ED-44D6-81FB-8CBE779EB5C5} (Microsoft)
C:\Program Files\Wireshark>tshark -i 3 -f "port 69"
Capturing on Broadcom NetXtreme Gigabit Ethernet Driver (Microsoft's Packet Sche
duler)
0 packets captured
reply
biomesh @ 11th Sep 01:28PM:
Re: CYT Device: Unlocking Information
That will only show tftp traffic, if you want to see all traffic, just start without the -f option, or use this:
-f "port 69 or port 53 or port 80"
This will capture tftp, dns, and http traffic.
reply
SteveLV702 @ 11th Sep 03:57PM:
Re: CYT Device: Unlocking Information
C:\Program Files\Wireshark>tshark -D
1. \Device\NPF_GenericDialupAdapter (Generic dialup adapter)
2. \Device\NPF_{2E79C009-432B-4077-ACEE-8A577736A151} (Broadcom 440x 10/100 Inte
grated Controller (Microsoft's Packet Scheduler) )
3. \Device\NPF_{3F1CBEDC-92D4-434A-B3DE-24035BD42AB2} (Intel(R) PRO/Wireless 291
5ABG Network Connection (Microsoft's Packet Scheduler) )
C:\Program Files\Wireshark>tshark -i 2 -f "port 69 or port 53 or port 80"
Capturing on Broadcom 440x 10/100 Integrated Controller (Microsoft's Packet Sche
duler)
0 packets captured
C:\Program Files\Wireshark>
reply
biomesh @ 11th Sep 04:15PM:
Re: CYT Device: Unlocking Information
Try it with out the filter option to see if you get any thing to show up. If it doesn't it could be a problem with winpcap not being installed, or just a problem with winpcap (or windows firewall, etc)
reply
SteveLV702 @ 11th Sep 04:52PM:
Re: CYT Device: Unlocking Information
okay well I will try it tomorrow but I know its not winpcap not installed cause I checked and its installed.. And know its not windows firewall as dont have windows firewall on/enabled but I will disable my firewall that I do have before I run it...
reply
mazilo @ 11th Sep 06:12PM:
Re: CYT Device: Unlocking Information
I just want to reiterate that you do use a HUB (not a switch) to connect your computer and ATA devices to sniff.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
SteveLV702 @ 11th Sep 06:29PM:
Re: CYT Device: Unlocking Information
I've tried using a HUB (no luck) so then tried connecting via another router (no luck) so finally I even tried connecting RT31P2 and PC directly together (no luck)
I tried connect through the WAN port and even tried one of the LAN Ports
reply
jwx213 @ 26th Sep 06:11AM:
Re: CYT Device: Unlocking Information
CYT working perfectly! So far done 20 boxes....
Is it true however that Vonage have released patched firmware for the D-Link VTA that stops it unlocking them? :(
I am on 1.00.07 and have no issues, but has anyone come accross new firmware that wont unlock? :hmm:
reply
pram @ 27th Sep 01:29PM:
Re: CYT Device: Unlocking Information
rcilink, any thought on when you will have the CYT with the options to change the sip settings? I have an unlocked Motorola vt2442 without the ability to modify the sip settings. Do you have any early-builds with that feature that I can try on my vt2442..
reply
mazilo @ 27th Sep 03:35PM:
Re: CYT Device: Unlocking Information
said by jwx213 :
Is it true however that Vonage have released patched firmware for the D-Link VTA that stops it unlocking them? :(
If Vonage has done so, then expect Vonage to release a new PAP2v2 firmware, too.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
anon @ 27th Sep 10:53PM:
Re: CYT Device: Unlocking Information
Hi kenjreno !
Can you help me with CYT and IP8100 ?
I was able to do the step with CYT but ADmin/Admin doesn't work ... even after power off.
I'm able to connect with user/tivonpw.
Not sure of what to do after that ... do i have to setup a tftp server ? ... or grabbing a file from vonage tftp ?
Please help me ;-)
Marco
reply
sunkillah @ 27th Sep 11:08PM:
Re: CYT Device: Unlocking Information
Please please please ... tell me how :-)
Is there a magic trick ? ;-)
Merci beaucoup !!
reply
sunkillah @ 28th Sep 02:02AM:
Re: CYT Device: Unlocking Information
Ok i found the bug. Use Cyt35 with IP8100. Not the Cyt39 ! !
reply
pram @ 28th Sep 04:49AM:
Re: CYT Device: Unlocking Information
said by SteveLV702 :
thanks works perfectly.. Cant wait until can change the SIP Settings in the vt2442 though :)
I provisioned the vt2442 with the xml that I got for a VTA-VR(VTA-VR thread- last post on page 7 by madmatrix that had tiYOURMAC_voipstunt attachment), and vt2442 now works with voipcheap. Have Line 2 configured for freedigits, have not verified that yet ..
reply
astroman72 @ 1st Oct 11:28AM:
Re: CYT Device: Unlocking Information
I own two D-Link VTA-VR (Vonage) and I can't get past step #7 of the TFTP Procedure to upgrade. I can login with user/user but the adapter is not changing the user password to 1234. No matter how many times I try, (including clicking on the "Accept" button and then "Save & Reboot", it reverts back to the "user" password. I even tried to change the PW with the firewall and Antivirus off.
Since I can't change the PW to 1234, I tried to do the TFTP upgrade procedure with the adapter's web browser open with user/user in the background and a new IE window open to run the upgrade in the foreground and the following response came back:
"The requested URL '/upgrade?tftp://192.168.1.110/PAP2-SP2K.bin' was not found on this server". Note: the adapter's web browser IP is: 192.168.111
On the upper right hand corner of the login page of the web browser it shows the following info: VTA-11.4.0-r060331-1.00.07-r060418.img
I've also tried unlocking the adapter using different versions of CYT to no avail. I am completely frustrated that after reading all the recommended posts by Mazilo and yourself, I still can't get this darn contraption to unlock so I can use it with my Stanaphone account.
Alot has been written and said about the VTA-VR on this forum even after all the reading I've done.
If you can give me some help I would be most grateful.
Astoman
reply
DogFace05 @ 1st Oct 01:45PM:
Re: CYT Device: Unlocking Information
Astrodude,
You're trying to unlock your VTA-VR with the procedure for unlocking the old PAP2v1 (with fw <= 3.1.6). That won't get you anywhere as the VTA and PAP2v1 are completely different devices.
reply
mazilo @ 2nd Oct 05:34AM:
Re: CYT Device: Unlocking Information
said by astroman72 :
I am completely frustrated that after reading all the recommended posts by Mazilo and yourself, I still can't get this darn contraption to unlock so I can use it with my Stanaphone account.
It suffices to say you are completely LOST! As DogFace05 has pointed out, you tried to unlock your VTA-VR with the PAP2 unlocking steps. LOL
Dude, do yourself a big favor: Go back to read the posts again and again and again until you understand. IIRC, I believe you are the 2nd person who did this similar thing ... LOL
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
astroman72 @ 2nd Oct 12:55AM:
Re: CYT Device: Unlocking Information
Dogface05,
If you read the posts on CYT and using PAP2-SP2K.bin, you will notice that the VTA-VR is amongst the adapters that can be unlocked with both procedures.
reply
DogFace05 @ 2nd Oct 05:03AM:
Re: CYT Device: Unlocking Information
Astrodude,
You are thoroughly confused. I don't know where you've found any post claiming that the VTA-VR can be unlocked with the old procedure for the PAP2v1, but I can tell you in no uncertain terms that anyone who makes such a claim, doesn't have the remotest clue what in hell he or she is talking about.
The old PAP2v1 can be flashed with the modded firmware of the SPA2000--PAP2-SP2K.bin--for the purpose of unlocking, as both the PAP2v1 and SPA2000 are based on the same architecture (with a processing chip from ESS, and the same software base and proprietary OS) and are virtually identical designs. This is the unlocking procedure that you are trying to apply to your VTA-VR, which on the other hand is compatible with the newer PAP2v2, a device which despite its name does not share any architectural similarities whatsoever with its similarly named predecessor--NONE, ZIP, ZERO, NADA. The VTA-VR and PAP2v2 are designed around a VoIP chip from TI (with a completely different processor core than the ESS chip) and run Linux as their OS. You have to use the CYT tool to unlock those. By the same token, CYT cannot be used to unlock the PAP2v1.
reply
mazilo @ 2nd Oct 07:15AM:
Re: CYT Device: Unlocking Information
said by astroman72 :
If you read the posts on CYT and using PAP2-SP2K.bin, you will notice that the VTA-VR is amongst the adapters that can be unlocked with both procedures.
Astrodude, until you provide the post you were talking about, there is no way we can tell what the hell is still spinning in your head about this confusion. There is no such thing about using the CYT with a PAP2-SP2K.bin to unlock a PAP2v2/VTR-VR. As I said before, go back to read and try to understand all those posts again and again and again until you see the light there! You definitely are lost here! LoL
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
astroman72 @ 2nd Oct 10:58AM:
Re: CYT Device: Unlocking Information
Dogface05 and Mazilo,
I apologize for taking up your time with my confusion. I bow my head in humbleness and pay the price of humiliation as some newbies (like me!!) have to pay when asking silly questions.
But let me just say that I have been reading, reading and reading....but I just realized when looking at the sticker on the back of each unit) that they are both version 1, as indicated below:
D-Link VTA-VR, Hardware ver. A4, Firmware ver. 1.00.07
I now realize that you were both right all along.
I notice that the information on the upper right hand corner of the Login page of the web browser of both units (VTA-11.4.0-r060331-1.00.07-r060418.img) coinsides with the version indicated on the sticker because it includes the "1.00.07" shown on the sticker...silly goose!
Let me go back and re-read the posts and search for posts on the version 1. I will come back with reasonable questions(if any) after I've educated myself.
Regards,
Astroman
reply
rcilink @ 2nd Oct 12:42PM:
Re: CYT Device: Unlocking Information
said by astroman72 :
...D-Link VTA-VR, Hardware ver. A4, Firmware ver. 1.00.07...
I am curious... have you tried CYT in your efforts to unlock this device?
I am not sure why you are interested in PAP2 unlocking if you dont have a PAP2.. You have a D-Link VTA-VR, right?
BTW, the scoop they are trying to tell you is something like this... The Linksys PAP2 (without the v2.0 on the label) is considered the "version 1" or first release. It is the device that is based on the ESS chip and is NOT running Linux. The newer versions of the Linksys PAP2 now show a ver 2.0 on the label (also on the box, near the UPC). This is an identifiable clue letting you know that the box is using the TI DSP, not the ESS chip. Also, this is a give-away that it is running Linux.
So... If you see the "ver 2.0" on a Linksys PAP2, you can use CYT to unlock it.
Here is an easier, more exciting way to figure out which PAP2 you own:
L I N K S Y S P A P 2 - I D E N T I F I C A T I O N G U I D E
PAP2 using ESS chip = FOUR BLUE LEDS = use "PAP2 unlocking thread"
PAP2 using TI chip = FOUR GREEN LEDS = USE CYT to unlock this
or
(pressing *** to access IVR, you hear "configuration menu")
words spoken in MALE voice = use "PAP2 unlocking thread"
words spoken in FEMALE voice = USE CYT to unlock
or
(turn PAP2 so you see PHONE jacks) Does it have a RESET button?
NO = PAP2 w/ ESS = use "PAP2 unlocking thread"
YES = PAP2 ver 2.0 = USE CYT to unlock
-----------
One last by the way.. The D-Link VTA-VR uses the TI chip, so it is running Linux. Use CYT to unlock it.
reply
astroman72 @ 2nd Oct 11:58PM:
Re: CYT Device: Unlocking Information
rcilink,
Yes, I have tried to use CYT to unlock the device. As a matter of fact, I have tried with versions 3.0, 3.5 and 3.9
This is the procedure I have tried:
1. Disconnect router (Linksys WRT55AG) from Internet
2. Turn off Firewall on WinXP
3. login to the web browser of DTA-VR with user/user
4. In then run CYT, choose option #3 and change IP to
device IP, hit Enter
5. Press Option #1 and I get "Security Violation". At times
the error message will come on instantly when I hit #1
and in others the screen doesn't show the error message
for a few seconds and then boom, Security Violation.
I tried with at least 3 different versions of CYT and on a different PC and also on a Laptop, with same results.
As an off topic:
I don't recall where I got it from (since I've been reading so many different posts and in another forum (Bargainshare.com) but I stumbled onto a way to access the Provisioning page on one of the devices and got the information to download the xml file (the default one since the "Present" one was "not on the server"), which I did get. However, I can't do shitte with it because I can't get CR4 running properly on WinXP to decrypt it and get the Admin Pwd.
In a nutshell, that's how far I've gotten as far as unlocking these babies.
UPDATE:
Well Fellas,
Did more reading and I found the missing information I needed to get CYT to work. Thanks for the coaching.
I put CYT35.EXE in a folder in C:\ and ran CYT35 from a CMD prompt screen with the following syntax:
CYT35.EXE DLINK.
That did the trick to unlock the devices.
Now that they are unlocked, I want to set then up for Stanaphone.
reply
boogerman69 @ 6th Oct 01:28PM:
Vtech IP8100
Hey anyone want to expand on their success with the IP8100?
I originally could log on with Vtech/vtech and user/tivonpw. CYT35 and CYT39c did nothing but tell me that I needed to log on when I was already logged on. So like an idiot, I did restore factory defaults. After doing this, I could only log on as Vtech/vtech and do basically nothing. CYT still didn't produce results. I put the unit on the internet and ran a sniffer on it. After 15 minutes, it still hadn't phoned home, so I shut the sniffer down and just let it sit. Well apparently it did phone home to Vonage at some point because now the user/tivonpw works again. I ran CYT39c and it just sits there like it didn't work, but I now notice that after a reboot when I log in as user/tivonpw. The screen now gives me a restore settings and a firmware upgrade tab.
Can anyone tell me if I am on the right track with this beast??
Thanks in advance,
BM
reply
rcilink @ 6th Oct 02:46PM:
Re: Vtech IP8100
when you run the CYT tool, try adding VTECH to the command line. For example:
CYT VTECH
This should help you out.
reply
boogerman69 @ 6th Oct 03:38PM:
Re: Vtech IP8100
Thanks for the fast reply rcilink.
I did run this program with the VTECH added on. I let it run for over 10 minutes.
Do you think these revs could have anything to do with it?
Firmware Version: 11.4.0-r060330
Release Number: 4.016.1-r000015
Bootloader Version: 1.3.3.1101
I can see all these options when logged on as user:
Restore router settings
Restore provisioned settings
Restore all settings
Restart the broadband telephone
I am not exactly sure what to do from here. The RTP300 was a snap compared to this device.
reply
boogerman69 @ 6th Oct 07:37PM:
Re: Vtech IP8100
Update to my issue. I now can get CYT 3.9 to tell me that it successfully updated my passwords, but I can never log in. I will get this thing open if it kills me!!
reply
rcilink @ 9th Oct 03:03AM:
Request for information
If you have configured one of these 'CYT' devices using an XML file, please send me a safe (passwords changed, etc.) copy.
I would like to get as many 'known good' configurations. This will save many people lots of hours with configuring these devices.
The XML portion of cyt is almost ready for primetime.. It now has the ability to read a properly formatted XML file and allow you to make instant changes prior to 'unlocking' your device. This will make it possible for you to combine steps. If you have a known good XML for the new provider you wish to use, simply tell the new cyt which provider and it will pick it up and include the custom changes in the unlock.
I guess it is a 2-step. Make your XML (or get a known good one) and then run CYT to unlock+configure device.
Once stable and tested, look for CYT 4.xx
(more info will be provided soon.)
reply
pram @ 9th Oct 03:55AM:
Re: Request for information
I used one of the vtavr xml posted here for my vtavr and moto2442, and both worked fine, the only issue was the echo, and it improved a lot after I modified the RX_ON_HOOK_DGTL_GAIN,TX_ON_HOOK_DGTL_GAIN,RX_OFF_HOOK_DGTL_GAIN & TX_OFF_HOOK_DGTL_GAIN to -6
»/r0/download/1···ine1.zip
reply
boogerman69 @ 9th Oct 09:08AM:
Re: CYT Device: Unlocking Information
I finally got into the IP8100. I had to run CYT a few times, but it eventually gave in and changed the PW. I got the decrypt key and even got the "default" vonage XML file. Once I get this unit to play nice with Asterisk, I will mod the XML and feed it to the unit.
The only issues I am having with this phone are 1 major and 1 minor.
1. Major - After about 2-3 hours, the unit just basically disappears from the network. It will get dial tone but then nothing works. I notice at this point I can't ping the base. Asterisk still shows it registered. I set the registration to 1200 on the Vtech. I keep tweaking settings hoping to overcome this issue.
2. Minor - Call waiting is not working. When in use, a second call dumps straight to voicemail. I am also tweaking this as well. The web gui kind of sucks for this unit, a lot of 0 or 1 choices rather than real parameters. I wish there was a way to dump the actual config from the unit. This would facilitate configuring it for sure.
BM
reply
mazilo @ 9th Oct 09:54AM:
Re: CYT Device: Unlocking Information
said by boogerman69 :
Major - After about 2-3 hours, the unit just basically disappears from the network. It will get dial tone but then nothing works. I notice at this point I can't ping the base. Asterisk still shows it registered. I set the registration to 1200 on the Vtech. I keep tweaking settings hoping to overcome this issue.
I believe this device is based on the TI AR7 chipset, the same one used on a PAP2v2/VTA-VR. I get this kind of behaviour if I tried to configure my PAP2v2 with two lines enabled. So, R U trying to enable two lines on this device?
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
boogerman69 @ 10th Oct 10:51AM:
Re: CYT Device: Unlocking Information
No, but funny that u ask that. I did discover on this unit if you go to line1 config then manually change the url from line=1 to line=2 you get another line configuration. I did quickly try to configure it, but it didn't appear to work and I wanted to concentrate on the problem at hand.
I am only doing 1 line. Do you think the VTA-VR docs might give me more insight into the configs for this unit?
I only have PAP2T's no V2's to play with.
reply
netmitra @ 12th Oct 02:30AM:
Re: CYT Device: Unlocking Information
Hi;
Was anybody able to unlock WRTP54G using cyt. I tried hard, but not luck
reply
netmitra @ 12th Oct 03:01AM:
Cant Unlock WRTP54G
Please help.
I am using cyt39c to unlock a Vonage WRTP54G with firmware 1.00.20. The cyt screen gets stuck here for ever.
____________________________________________________
CYT-Unlocker - Local network version v3.9c
Simple XML provision server is waiting for your device..
This should only take up to one minute.
If it takes more than one minute, you may stop the XML
provision server by pressing the [ESC] key.
----------------------------------------------------------
Press [esc] to exit.
STATUS: XML Server started. Your Device is: WRTP54G
reply
artur_s08879 @ 12th Oct 10:19PM:
Re: CYT Device: Unlocking Information
please help with IP8100
reply
mazilo @ 12th Oct 11:40PM:
Re: CYT Device: Unlocking Information
said by netmitra :
Was anybody able to unlock WRTP54G using cyt. I tried hard, but not luck
Can you perform a firmware upgrade on your WRTP54G? If so, then you can flash it with a modded -NA firmware.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
boogerman69 @ 13th Oct 08:57AM:
Re: CYT Device: Unlocking Information
On the IP8100 I found that CYT worked when logged in with the user /tivonpw account not the vtech/vtech acount and I had to run it a couple of times and then it worked. I imagine the WRTP54G will be the same scenario with logons.
the 8100 unlocked and reconfigured nicely, now if I can just keep the unit "alive" on the network/Asterisk life will be good, its a great working cordless phone
reply
artur_s08879 @ 13th Oct 11:08PM:
Re: CYT Device: Unlocking Information
so...what's the problem with your IP8100 it self reseting=updating?
reply
anon @ 14th Oct 09:59PM:
Re: Cant Unlock WRTP54G
I'm having the same issue, anyone have a resolution to this one?
reply
anon @ 14th Oct 10:26PM:
GOT IT!
check out this link: »Devomit Vonage(?) from RTP300/WRTP54G
Which will direct you to this one (which worked for me):
»Getting a WRTp54G to take 3.1.17-NA...
reply
anon @ 14th Oct 10:27PM:
Re: Cant Unlock WRTP54G
Agh, just remember to try and use the "user" account (with a default password of "tivonpw") if /update.html doesn't play nice for you!
reply
deskjockey @ 15th Oct 09:24AM:
Re: Cant Unlock WRTP54G
I had the same problem with Vonage D-Link. I went back to the CYT 3.5 and worked like a charm.
reply
netmitra @ 15th Oct 12:12PM:
Re: Cant Unlock WRTP54G
No Luck;
My WRTP54G wont understand user: tivonpw.
THe only login I have is admin:admin
reply
mazilo @ 15th Oct 01:46PM:
Re: Cant Unlock WRTP54G
said by netmitra :
My WRTP54G wont understand user: tivonpw.
tivonpw is the user password assigned by Vonage. You will need to have your WRTP54G provisioned by Vonage once in order for it to recognize tivonpw assuming tivonpw is still the password used/assigned by Vonage.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
boogerman69 @ 16th Oct 10:17AM:
Re: CYT Device: Unlocking Information
Arthur,
It is not resetting, it goes to sleep for lack of a better term. The ready light is green, but you can't ping it. Asterisk shows it as unregistered. If I pull power it comes back on nicely and works great for about two hours, then drops off again. Green light staying.
Does anyone have a default working xml that I can modify and feed the unit?
reply
netmitra @ 16th Oct 11:35PM:
WRTP54G Unlocked ---- Thank you guys !!
After 1 week of attempts - Success now.
I was successfully able to unlock my Vonage WRTP54G using the firmware upgrade procedure. THe cyt software failed to do so. I used the following link and it worked like charm !
»Getting a WRTp54G to take 3.1.17-NA...
My router wasn't accepting any user:tivonpw password and I was stuck. Then I did a factory reset using the poke-in button at the back. After that I was able to access update.html and then upgraded the firmware. Now I am on 3.1.17 and life feels good. Configuring VIatalk was a cakewalk.
Next Project is to install astersik on this. ANy easy-2-go guide will be appreciated.
reply
anon @ 17th Oct 10:05PM:
Re: CYT Device: Unlocking Information
Is there a way to unlock the Motorola vt1005v yet ?
reply
mazilo @ 17th Oct 10:48PM:
Re: WRTP54G Unlocked ---- Thank you guys !!
said by netmitra :
Next Project is to install astersik on this. ANy easy-2-go guide will be appreciated.
Porting asterisk to this router seems to be OK; however, making asterisk to work with ggsip is a bit of challenging. One way to resolve this problem is to replace ggsip with zaptel, but it ain't going to be an easy task.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
daiyan3 @ 19th Oct 02:59PM:
Re: CYT Device: Unlocking Information
Can we unlock earthlink version on WRTP54G?
reply
mazilo @ 19th Oct 08:43PM:
Re: CYT Device: Unlocking Information
said by daiyan3 :
Can we unlock earthlink version on WRTP54G?
If you have the device, give it a try and let us know. Honestly, I would just flash a modded WRTP54G-NA firmware to see if a WRTP54G-ER will take to completely unlock it.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
daiyan3 @ 21st Oct 10:38PM:
Re: CYT Device: Unlocking Information
I would love to give a try to use WRTP54G-NA firmware to unlock ER. Does anyone know the password?
reply
mazilo @ 22nd Oct 12:23AM:
Re: CYT Device: Unlocking Information
said by daiyan3 :
I would love to give a try to use WRTP54G-NA firmware to unlock ER. Does anyone know the password?
To perform a firmware upgrade on a WRTP54G, you will need a user password. For a WRTP54G from Vonage, you will need to put the device on the Internet to let it get provisioned by Vonage because Vonage seems to use a single known user password for most of its VoIP devices based on a TI AR7 chipset. As with ER, who knows what the user password is. In this case, your alternative solution is to feed the modded WRTP54G-NA firmware through a TFTP server. This requires you first need to the name and location of the firmware your WRTP54G-ER will look.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
AndrewZ @ 22nd Oct 06:20PM:
Re: CYT Device: Unlocking Information
Hello
I'm looking for the configuration parameters description for devices based on the TI AR7 chipset.
I have unlocked my Vtech IP8100 and I need to change some parameters like dialplan, timezone and others present in the XML provisioning file and in the WEB-interface.
Thanks!
reply
boogerman69 @ 23rd Oct 11:20AM:
Re: CYT Device: Unlocking Information
Here is a strange one...
My unlocked IP8100 which kept dropping off the ip network.. well, I powered it off and on yesterday and guess what. It somehow factory default/reset and I had the standard Vonage redirect to 666 redirect "your phone is plugged into the wrong port" message. I removed all the auto provision settings and I did not do any type of fact reset. The passwords were reset that is how I know it was factory reset. Heck, the only way I know how to factory reset is through the web browser. My unit is behind a firewall, so nobody could have gotten in to mess with me..
This units behavior is very strange indeed. Well back to CYT again !!
reply
rcilink @ 23rd Oct 11:32AM:
Re: CYT Device: Unlocking Information
I ama curious.. do you remember if you had the provision server set to:
http://127.0.0.1
If not, what was in that field?
reply
boogerman69 @ 23rd Oct 11:43AM:
Re: CYT Device: Unlocking Information
Yes, it was set to 127.0.0.1
When I put it back online I am going to put a bogus default gateway IP in to make sure it can't get out.
reply
rcilink @ 24th Oct 01:03AM:
Re: CYT Device: Unlocking Information
I will do some testing and let you know what is found..
The 'vonage' firmware loaded in these devices has a file with all the factory defaults pre-set. Those defaults include vonage tftp server info, etc. If you dont get a provision file after a certain amount of time (days? hours?), it defaults to the file and pulls from vonage. This action can be seen by reviewing the voice syslog (Linksys TI-based units have this)..
I want to test it and see how many hits ('file not found' = success) to 127.0.0.1 it wil take before it defaults to vonage. If it defaults in a fixed amount of time, then it means we will have to make a way for this device to disable provision or get a valid provision file from a non-vonage server.
---------
Anyone care to assist with interpreting the GPL license on this (Linksys GPL'd the RTP300 / WRTP54G firmware)? If we can get a good understanding of the license, then why not just change the file, removing vonage completely, and re-releasing the new firmware?
The sticky parts: Radvision SIP toolkit. This is the 'ggsip' file in the firmware that handles the actual FXS phone ports. They (manufacturer?) pay royalties to Radvision for the license to use that piece. So, no source code is provided for that part. Another part is the cfgmgr. The 'cm_logic, cm_...*' files can be found in the firmware. No source is offered for these compiled programs.
So, since the firmware GPL package exists in the first place, does that give us the right to modify it and re-package it (with it including the non-source pieces)?
reply
boogerman69 @ 25th Oct 09:09PM:
Re: CYT Device: Unlocking Information
I am going to work on a XML file that I can feed it via my own tftp server and see if that helps. This thing still goes offline for no apparent reason. I have it syslogging debug level to a log server, maybe we can get some idea in the coming days.
reply
anon @ 26th Oct 05:37PM:
Re: CYT Device: Unlocking Information
Hello, I need know how config the Motorola VT2442 fot that working in other SIP company (at the moment, work in Vonage). I cant accede to SIP config (provisioning server, etc). If your help me, thank for this.
Bye
reply
rybshik @ 26th Oct 09:57PM:
Re: CYT Device: Unlocking Information
Cannot unlock my new vtech 8100-2 bought in Canada (Future Shop).
Firmware Version: 11.4.0-r060330
Release Number: 4.016.1-r000015
Bootloader Version: 1.3.3.1101.1
Tried cyt30, cyt35, cyt39c. Always get error message " Security Violation! Please Login" at step 1. Although I did login to the device with VTech/VTech and user/tivonpw.
Please help.
reply
rybshik @ 26th Oct 10:51PM:
Re: CYT Device: Unlocking Information
update.
Now I do get the second screen with default passwords:
quote:
Your device has several login accounts. The security-level for each is
different. You should assign your device unique passwords to keep it secure.
Login Name Default Password Description
admin admin ROUTER-level access (lowest)
user tivonpw USER-level access (medium acc)
Admin (unique value) ADMIN-level access (full acc)
Note: Some devices change the Login Name..
These passwords listed below will be set on your device.
ADMIN-Level login: Admin ADMIN-Level password: Admin
USER-Level login : user USER-Level password : user
-------------------------------------------------------------------------------
ake changes to the values above & press [ENTER] to begin updating your device
STATUS: Please Verify Settings Your Device is: VTech Device
But when I press "Enter", it stuck with a message:
quote:
Simple XML provision server is waiting for your device..
This should only take up to one minute.
If it takes more than one minute, you may stop the XML
provision server by pressing the [ESC] key.
reply
rcilink @ 26th Oct 11:33PM:
Re: CYT Device: Unlocking Information
Is your "Windows Firewall" turned on? If so, turn it off and try again.
Don't forget to turn it on when you are all done.
reply
pram @ 27th Oct 02:14AM:
Re: CYT Device: Unlocking Information
follow steps provided in the guide put together by jolport for vta-vr »/r0/download/1···uide.zip, if you can get your xml file from vonage, great, but if not ignore the part where you fetch the xml from vonage, and pick up an xml from the vta-vr forum. Modify the authentication values, and from your provisioning tab on vt2442, provide the tftp://serverip where you are running your tftp server that will server your ti.xml file, and restart vt2442 and it should pick up the xml and configure itself.
ps: if you already unlocked vt2442, then your vonage settings may be lost and I am assuming that you no longer use vonage..
reply
boogerman69 @ 27th Oct 11:08AM:
Re: CYT Device: Unlocking Information
Here is what works everytime for me on the 8100:
1. Connect to the PC side port directly to your PC/laptop
2. DO not use a second NIC in your system to connect. CYT doesn't seem to like that setup.
3. Run CYT35, not 39c. Run it like this CYT35 VTECH
4. After the second screen, just hit enter and go have a smoke or a beer (or both)
5. Come back and you will see success.
6. If it still won't login with Admin/Admin, just repeat.
Remember the default is Admin/Admin note the capital A and it is case sensitive.
reply
anon @ 28th Oct 03:17AM:
Re: CYT Device: Unlocking Information
I unlocked the Vtech 8100 successfully with your steps.
Please advise me how to access or how to change the settings for Line 1 or Line 2. to allow me to connect to my local network asterisk box.
reply
tigger66 @ 31st Oct 10:41AM:
Re: CYT 3.9c available for use.
I am having a problem with non default password setting in version 3.9C.
My setting is as following:
_______________computer (running CYT)
| (192.168.15.100)
|
Linksys Router ------hub
(192.168.15.1) |
|_______________ PAP2 Version 2
(192.168.15.101)
I can set the default passwords in the CYT 3.9, but was not able to set my own passwords.
The program works, showed a screen displaying the new passwords. However, these new passwords just won't work in the /update.html page even after I cleaned cache on my computer and powercycled everything.
Don't know if it is my setup or something.
reply
pram @ 31st Oct 12:42PM:
Re: CYT 3.9c available for use.
I have had similar problems with pap2 and cyt3.9, so I always end up using cyt3.5, but most have been successful with 3.9.
The pap2 has a 2 step access setup, you will have to login to pap2 as the regular admin/admin (lower case a) at http: //pap2ip, and then go to http: //pap2ip/Voice_adminPage.html and login using the Admin/yourpass. the same applies for update.html/Provision.html
reply
deskjockey @ 31st Oct 04:31PM:
Re: CYT 3.9c available for use.
deleted
reply
deskjockey @ 31st Oct 04:38PM:
Re: CYT Device: Unlocking Information
deleted
reply
anon @ 1st Nov 02:02AM:
Re: CYT Device: Unlocking Information
I have a unlocked PAP2 v2. Used CYT 3.9 to unlock.
I am using Line 1 with Sipphone.com,
For some reason after a few hours it seems to disconnect from the network. Then I must power cycle the unit to bring it back up to the network.
Does anyone have a tip to a setting to allow it to stay connected for good?
I have a PAP2 v1 using the same config with sipphone also. That one works perfect no dropping of network.
Please advise....
reply
WYCF @ 1st Nov 12:59PM:
Re: CYT Device: Unlocking Information
[Solved, see next post]
NEED YOUR HELP! Please!
I successfully unlocked my VAT-CV box two day's ago. Yesterday I was trying make some changes on dial plan and I am kind of massed up it. The TFTP won't go through! Have tried lot times then I give up and did a factory reset.
Now it seems I am back to the beginning but actually not. First I can't unlock it with cyt39c. So I tried cyt35 and luckily it works. Then I try to tftp the xml file but the tftp server(SolarWinds.NET TFTP SERVER) only shows one line of sent, not three times as before. Of course it is failed and now the power led is always blinking and the Internet led is solid on. line1 and line2 is off. :(
Thank you and I really need help!
reply
WYCF @ 1st Nov 05:38PM:
Re: CYT Device: Unlocking Information
Update:
Finally I made it. I repeat did every single step following the guide again and now I can flash the xml to my VAT.
Here I got a new problem. I am with a local VSP and I tried to use this VAT to replace my PAP2. The VAT can register on the SIP server and out going call is working fine. But if I call my VoIP number from my cell phone (incoming),it will ring, then after pick up there is only noisy sound, and no sound on the cellphone.
I tried different setting and couldn't figure out what's wrong. Please help me and give me some advices. Thanks.
reply
boogerman69 @ 2nd Nov 09:46AM:
Re: CYT Device: Unlocking Information
Interesting Steve006
Since the PAP2V2 and the Vtech IP8100 are the same chipset, I have noticed that same issue with the 8100
Now after tweaking the crap out of this phone, I think I might have fixed this problem. I have had it online since about 8pm last night. It still shows registered. If it stays on, I will post what settings I can think of. One change I did make was to put an XML in a valid tftp server and I have pointed the 8100 to that server. There is some suspicion that this device will go to sleep after so many unsuccessful attempts at pulling provisioning info.
I don't know anything about the PAP2v2, but maybe there is "unlocked" firmware that once loaded should stop any strange behavior.
reply
anon @ 2nd Nov 09:10PM:
Re: CYT Device: Unlocking Information
Hi,
I can not get tftp fetching xml file from vonage server. It keeps getting timeouts. I have triple checked the correct folder name and MAC id on pap2.
is there any generic xml file i can use on pap2?
reply
pram @ 3rd Nov 01:05PM:
Re: CYT Device: Unlocking Information
vikra - you do not need the xml, and can modify all settings via the web UI on your unlocked pap2v2
reply
tmp02 @ 3rd Nov 10:32PM:
Re: CYT Device: Unlocking Information
OK. I can not find anything on the moto vt2442 even though all the boards mention it in passing but look at Linksys or other . I have used all the CYTs (3.5, and 3.9c) and nothing. One thing that is different on this vt2442 then what I have read on any board is that the user/passwd is router/router, not admin or user or anything like that. Vonage just sent this to me in the last 5 months. I dumped them for voipbuster, but I want to use the VT2442 since Von would not take it back. Any help unlocking this thing would be greatly appreciated? Could it be a new variant (or version) of Moto VT2442?
reply
rcilink @ 4th Nov 12:43AM:
Re: CYT Device: Unlocking Information
Did you run cyt with the MOTO param?
Eg: CYT35.EXE MOTO
You do need to login to your VT2442 device (router / router is ok).
Let us know if that helps..
reply
AndrewZ @ 4th Nov 12:18PM:
Re: CYT Device: Unlocking Information
answering my own question - if you want to change NTP-related parameters you can do it in your .xml file:
<sntp>pool.ntp.org</sntp>
<timezone>GMT+0BST-1,M3.5.0/01:00:00,M10.5.0/02:00:00
</timezone>
You may use the following link as a reference to timezone parameter:
»wiki.openwrt.org/OpenWrtDocs/Con···c2bd7343
I have VTech ip8100 phone and Timezone field is available through the web-interface but the value was not preserved on reboot. Now (after xml provisioning) everything is OK.
reply
csayers @ 4th Nov 12:24PM:
Re: CYT Device: Unlocking Information
Andrew,
What section of the xml file did you put the timezone info, or does it matter?
Thanks,
reply
AndrewZ @ 4th Nov 01:11PM:
Re: CYT Device: Unlocking Information
just next to sntp line which is present in the original .xml
reply
AndrewZ @ 7th Nov 08:55AM:
Re: CYT Device: Unlocking Information
I want to share some results of my .XML investigations:
This is re-registration timer, in milliseconds (!)
<REG_EXPIRE_TIMER>60000</REG_EXPIRE_TIMER>
If you are using your adapter outside of US ;) you may want to enable G.711A codec and probably others:
<TELEPHONE_EVENT_PT>101</TELEPHONE_EVENT_PT>
<PCMU_PT>0</PCMU_PT>
<PCMA_PT>8</PCMA_PT>
<G726_40_PT>21</G726_40_PT>
<G726_32_PT>2</G726_32_PT>
<G726_16_PT>23</G726_16_PT>
<G726_24_PT>22</G726_24_PT>
<G729_PT>18</G729_PT>
<G723_PT>4</G723_PT>
Hope it helps and some day we will be able to prepare the complete reference to the .xml provisioning file format.
reply
MartyT @ 9th Nov 01:53PM:
Re: Cant Unlock WRTP54G
Is there something unique about the WRTP5G with stock firmware 1.00.20 that keeps it from being unlocked using any version of CYT?
One other person mentioned no luck with this original firmware.
Anyone else? Any solutions? I tried turning off the wireless as suggested on some Vonage forums, but no luck.
This is a virgin unit, never registered with Vonage, straight out of a sealed box.
reply
rcilink @ 9th Nov 02:11PM:
Re: Cant Unlock WRTP54G
said by MartyT :
Is there something unique about the WRTP5G with stock firmware 1.00.20 that keeps it from being unlocked using any version of CYT?
CYT will not work with the 1.00.20 firmware..
A suggested solution (if it had previously been used with vonage):
1. Hook your WRTP54G with 1.00.20 firmware to the Internet
2. Press and hold reset using a paperclip in the pinhole on back
3. Apply power to device
4. After about 40 secs, lights will all blink. Remove paperclip
5. Let it sit there, on the Internet. It should get new firmware (1.00.62)
* Unlike the Linksys PAP2 (v1) and Sipura products, it is OK to let this one upgrade to the 1.00.62 firmware.
6. You can open a web browser and check the built-in page (top right) to see what firmware is loaded.
7. Use CYT (3.5 is reportedly more stable) to unlock it when it is 1.00.62.
reply
MartyT @ 9th Nov 03:08PM:
Re: Cant Unlock WRTP54G
This is a virgin router, out of the box, never registered with Vonage.
There are lots of them floating around like this that are being sold on Ebay, which is where I got mine.
Any solution on how to get them upgraded without subscribing to Vonage?
reply
mazilo @ 9th Nov 03:09PM:
Re: Cant Unlock WRTP54G
said by MartyT :
Is there something unique about the WRTP5G with stock firmware 1.00.20 that keeps it from being unlocked using any version of CYT?
Can you perform a firmware upgrade? If so, then you can unlock this beast and perhaps completely remove Vonage, a.k.a. turn it into a WRTP54G-NA.
Anyone else? Any solutions? I tried turning off the wireless as suggested on some Vonage forums, but no luck.
I never heard of this trick.
This is a virgin unit, never registered with Vonage, straight out of a sealed box.
As rcilink has already pointed out and unless you can perform a firmware upgrade, you will need to let this unit phone home to Vonage so that it will get provisioned with a known user password, i.e. tivonpw (unless Vonage has recently changed this to a new one), then use this user/tivonpw to perform a firmware upgrade (chances are Vonage will have pushed in for a new firmware).
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
MartyT @ 9th Nov 03:38PM:
Re: CYT Device: Unlocking Information
I think this information needs to be posted on the first post in this thread so future WRTP54G purchasers will not buy virgin units but used units that had already been activated by Vonage.
reply
mazilo @ 9th Nov 03:49PM:
Re: CYT Device: Unlocking Information
said by MartyT :
I think this information needs to be posted on the first post in this thread so future WRTP54G purchasers will not buy virgin units but used units that had already been activated by Vonage.
This information has been scattered on some of the VoIP forums already. All one needs is to search through Google.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
MartyT @ 9th Nov 04:12PM:
Re: CYT Device: Unlocking Information
Scattered? This seems to be the source of most of the info.
I've been to lots of places today and never seen it.
Now, how do I get a short and sweet subscription to Vonage??
reply
rcilink @ 9th Nov 04:57PM:
Re: CYT Device: Unlocking Information
said by MartyT :
Now, how do I get a short and sweet subscription to Vonage??
No subscription needed. Simply plug the thing into a live "Internet" cable and let it do the dirty work.
Worst case, prime it by hitting the RESET pinhole while powering up.
Check it after lunch/dinner and it should be done (upgraded).
reply
MartyT @ 9th Nov 05:16PM:
Re: CYT Device: Unlocking Information
rcilink, you stated this earlier, but you said it worked if you had already used the device with Vonage. Is that still the case, or will virgin, never activated units upgrade also?
reply
rcilink @ 9th Nov 08:59PM:
Re: CYT Device: Unlocking Information
said by MartyT :
...Is that still the case, or will virgin, never activated units upgrade also?
Yes, both. A new (never-used) unit should upgrade if the firmware is not current (to vonage standards). This is set in the XML file it will provision with.
A used unit with older firmware should also update when hooked to the Internet.
In either case, you should not need to sign-up for Vonage service.. Simply hook it to the Internet and see what happens. If nothing, try the reset pinhole..
reply
MartyT @ 10th Nov 02:17PM:
Re: CYT Device: Unlocking Information
Linksys has a new release of firmware for the WRTP54G on their website.
It is 3.1.20.
Anyone have any experience with it?
reply
mazilo @ 10th Nov 02:28PM:
Re: CYT Device: Unlocking Information
said by MartyT :
Linksys has a new release of firmware for the WRTP54G on their website.
It is 3.1.20.
It would be nice if you can provide the link when you mentioned the above. I went to Linksys site and only got the v3.1.17 as the latest one.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
MartyT @ 10th Nov 02:35PM:
Re: CYT Device: Unlocking Information
Sorry, but I might be mistaken about this. It is the Vonage version that is 3.1.20.
The -NA version is still 3.1.17.
Here is the link.
»www.linksys.com/servlet/Satellit···rWrapper
reply
mazilo @ 10th Nov 02:58PM:
Re: CYT Device: Unlocking Information
Thank you, Marty. You are right that v3.1.17 is NA version. I started to lurk around and notice Linksys suddenly changed the version number for a PAP2T firmware. Here is the latest firmware for a PAP2T v5.1.1.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
MartyT @ 11th Nov 11:18PM:
Re: CYT Device: Unlocking Information
Once a WRTP54G is flashed with the v3.1.17 firmware from the 1.00.62 version, should I be able to get back into the firmware update pages again using the user/tivonpw login combination?
I ask because I cannot. I've tried all known combinations and nothing works.
reply
mazilo @ 12th Nov 11:20AM:
Re: CYT Device: Unlocking Information
said by MartyT :
Once a WRTP54G is flashed with the v3.1.17 firmware from the 1.00.62 version, should I be able to get back into the firmware update pages again using the user/tivonpw login combination?
I haven't tried this; however, my WRTP54G currently runs on wrtp54g_fw_3.1.17_US.img firmware and I can freely factory reset the device and still be able to freely access its SIP menu.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
MartyT @ 12th Nov 12:07PM:
Re: CYT Device: Unlocking Information
So you actually go into Admin|Factory Defaults and say yes to "Restore Router Factory Defaults" and "Restore Voice Factory Defaults"?
I was afraid to do this for fear of restoring the Vonage code.
reply
mazilo @ 12th Nov 12:52PM:
Re: CYT Device: Unlocking Information
said by MartyT :
So you actually go into Admin|Factory Defaults and say yes to "Restore Router Factory Defaults" and "Restore Voice Factory Defaults"?
If you referred to my WRTP54G with WRTP54G-NA firmware v3.1.17, then the answer is yes.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
skypeuser @ 12th Nov 06:18PM:
Re: CYT Device: Unlocking Information
My wrtp54g works great with the 3.1.17 firmware.
Thanks very much to (rcilink).
I followed his instructions for hex editing and I never needed the cyt tools. This now looks very much like my
unlocked PAP2's. I like this router better than hooking up
a PAP2 on my desk. The PAP2 is much better when leaving home with it.
:D
reply
anon @ 12th Nov 08:49PM:
Re: CYT Device: Unlocking Information
Have unlocked the device after many many tries with 39c and 35 and various logins user/tivonpw(?) router/router but now Admin/Admin works and I can get to the Voice Provisioning tab but there are no places to enter the VOIPCHEAP details in...... ideas?
reply
MartyT @ 12th Nov 09:09PM:
Re: CYT Device: Unlocking Information
do you have an advanced link to click on, or an admin link?
reply
kawaisunn @ 12th Nov 10:47PM:
Re: CYT Device: Unlocking Information
Hello! First I would like to thank the moderators and contributors for this enlightening thread. Second, if this post belongs in another PLEASE redirect me! ;) There doesn't seem to be much specific info on the VT2442 (Vonage hangover...) so I thought I would share my limited experience unlocking it, for what its worth, as well as a few noob questions. I fought both cyt apps until I reset my router to the stock settings. I used the cyt35 ultimately to unlock. My VT2442 now has 3 confirmed log-ins; Admin/Admin, user/tivonpw, and router/router. Logging in with "router" gives the locked appearance in the gui. I contrived my xml w/madmatrix's tiYOURMAC file (found earlier in this thread), Jolpot's Guide for the D-Link VTA-VR @ bargainshare.com (Thank You!), and the Vonage file I decrypted. Naturally I had some trouble getting my router to request my file using a tftp (PumpKIN finally worked) so I tried the built-in Import/Export Configuration Utility under "Tools". Anyone have any luck with this angle? It exports a .bin ... After a lot of frustration I configured my system from my (192.168.15.2 static) nic on my computer, to a hub, then TWO outs to the VT2442; one to the "Internet" connection and one to an "Ethernet" connection. I logged out of the ATA before I attempted the transfer. I had also enabled "Allow Incoming Ping" in the "Port Forwarding" tab, and put my computer (192.168.15.2) in a DMZ. All other settings on the Motorola were factory presets (left over from initial unlock setup). Dunno how much of my effort was superstition, but it's how I finally got it to work even with limited VT2442 specific info. If you are having trouble with yours, READ THE THREADS!!! Then read 'em again! And putting all needed apps and files in one folder helps a lot at command line!
Has anyone configured Freedigits and Internetcalls with one of these? Or the pbxs.com? I haven't tested my script yet but would like to hear some success stories with this beast!
reply
pram @ 12th Nov 11:28PM:
Re: CYT Device: Unlocking Information
hey kawaisunn
I have my vt2442 configured for freedigits and voipcheap/freecall etc, and all you have to do is to get an XML (which you seem to have already done by getting madmatrix's tiYOURMAC file) and update your settings to the file for freedigits and internetcall. From your 2442 admin provisioning url, point it to your tftpserver with the new updates and reboot your 2442, and it should pick up the new files and configure itself. Check my prior posts for getting calls on line 2 into Line 1, and if you setup internetcall as line 1 and freedigits as line2, you should be set. Also there is an annoying echo , be sure to add the new settings from the vta-vr thread (page 22) »[General] DLink VTA-VR for getting rid of the echo. I personally have not tried the settings yet on 2442, but they work on vta-vr.
reply
kawaisunn @ 13th Nov 05:22PM:
Re: CYT Device: Unlocking Information
Thanks! I've been messing with darn thing for hours. I have yet to get a dial tone from any of a small handfull of VoIP apps I've tried. I seem to remember at boot, under the evil power of vonage, the telephone adapter led would blink twice or so. It stays on steadily from power up now. Even unplugging the phone jack doesn't get a blink. Ahhh, but I digress. Glad to hear yours is well in hand. Timely inspiration! I'm about ready to flash another file. Thanks again for the pointers and links!
reply
kawaisunn @ 13th Nov 06:28PM:
Re: CYT Device: Unlocking Information
And I have been wondering; meister_sd mentioned he did a rom dump on a V2.0 and I gathered there was memory to spare. If this is true with the VT2442 would it be possible to incorporate a STUN module into the unit?
reply
kawaisunn @ 21st Nov 12:56PM:
Re: CYT Device: Unlocking Information
Oh Yeah! And don't it feel GOOD!!! :D Just made my first "free" VoIP call. vonage can KMA. Thank you, pram, mazilo, jwx213, and all the rest of the gurus/gurus-in-training for the original work, patience, and generosity of information! I've an echo problem to clear up, and can't seem to connect to cell phones yet, but it feels like its downhill from here on out.
reply
kawaisunn @ 21st Nov 01:10PM:
Re: CYT Device: Unlocking Information
Ahh, any suggestions on how best to configure my VT2442 to make use of a STUN? There are no provisions to in the GUI. Im on a Motorola Canopy and apparently behind a small army of NAT routers. I confess I have spent all of my free time troubleshooting my own stupid mistakes and havn't done much legwork, but any information would be a windfall. Thanks!
reply
rcilink @ 11th Dec 12:39AM:
new release: CYT 4.6 [beta]
New version of CYT.. 4.6
------------------------
Some testing has been done to ensure it actually will unlock a device. Since it is still in beta, test it and reply here with your results.
Some changes found in version 4.6:
- XML customization option. (USE OPTION 3 - set device IP - before selecting this option!) Use this to set your SIP settings and unlock / feed the settings to your device. The settings will be changed while unlocking the device. If you use this option, it is important to keep the XML format in the same order.. The XML parser does rough checking for validity... If you want to make a XML to config your device for another service, simply copy the 'generic-sample.xml' to 'generic.xml'. (You may use an XML editor to change tag values, but dont change the tag order.. cyt will not read it if the order is changed.)
- Custom 'Admin' and 'user' passwords can be set. This will allow you to unlock the device, and keep it secure.
- add DLINK to command line when trying to unlock a D-Link VTA (or VWR) device. Forgetting to do this may present you with 'security violation'.
------
Looking for anyone who can take the 'generic-sample.xml' and make changes for use with a SIP VoIP provider.. If you want it to be included with the next release, post it here.
If you do this, please use the 'generic-sample.xml' as a template. You can add missing XML tags, if needed.
reply
MACD @ 12th Dec 06:01PM:
Re: new release: CYT 4.6 [beta]
Does anyone know, when the FWD.xml will be released ?
reply
mazilo @ 12th Dec 07:08PM:
Re: new release: CYT 4.6 [beta]
said by MACD :
Does anyone know, when the FWD.xml will be released ?
From whom do you expect FWD.xml will be released? ;)
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
anon @ 15th Dec 11:10AM:
Re: new release: CYT 4.6 [beta]
So, has anyone figured out how to patch -NA firmware so it can be loaded onto these, converting them once and for all? Rcilinks method for doing this on the wrtp54g worked really well. Would love to do it to a pap2.
-J
reply
rcilink @ 15th Dec 02:36PM:
Re: new release: CYT 4.6 [beta]
The problem with making a "one size fits all" firmware for these devices is this:
- Linksys uses a different partition layout than the others
- Linksys partitions on RTP300/WRTP54G are different on PAP2v2
- LED driver is different on D-Link from Linksys.
- Different Code pattern codes for Linksys versions.
- Firmware upgrade by web interface much harder than failsafe loader.
- I am just thinking of some of the things..
---
I have tried:
- I loaded RTP300 firmware on the PAP2 v2.0 unit. It did run, somewhat. I had problems with the fact that the RTP300 is a 'router' with WAN and LAN interfaces. The PAP2 v2 has only one LAN port. It did come up, but on RTP300, LAN offers DHCP server-- on PAP2 v2, no DHCP server, just client.
- I am trying to avoid any major patching of firmware to do this trick, but it looks like we may end up having to repackage the RTP300 firmware with PAP2v2 overlayed to pick-up some of the things like DHCP client mode, no WAN port, etc.
on another project, I also had loaded PAP2 v2.0 firmware on the D-Link VTA device. Again, the project was to get the Asterisk PBX running, so it did not have the normal SIP package (ggsip) loaded.. So, it did run, but not a complete test. I will have to load a PAP2 v2.0 firmware without modification on this VTA device to verify if it will run the FXS ports with the D-Link VTA hardware layout.
To be serious with these kinds of projects, you either need a flash chip programmer, or a serial console cable. Without a tool like this, you risk making your device into something completely useless!
If anyone has expert googling abilities, please join this search:
We are looking for a firmware that is used on a Horstbox being sold as a D-Link DVA-G3342SB. This is the 'Professional' model (they also have a standard model).
If anyone can find the firmware for that model, we will be very close to done with a universal firmware for this hardware.
It appears that this specific D-Link device is released in Germany. Brush-up on your German skills and send some messages to those who own them. Perhaps they will kindly make a copy of the firmware. (either the actual file or using 'dd' on the device to copy off partitions..)
Thanks!
reply
csayers @ 16th Dec 09:37PM:
Horstbox Pro
There is much discussion about this device here:
»www.ip-phone-forum.de/forumdisplay.php?f=549
The Files in question are here:
»www.maxina.de/downloads/Di2naiZohgoo/
although it looks like the device has two boards, one for the asterisk part and the other(the TI board) for the WLAN part, don't know if this is any help.
I used web translator on freetranslation.com babelfish didn't seem to work.
reply
anon @ 30th Dec 01:50AM:
Re: new release: CYT 4.6 [beta]
I have a moto vt2442 from vonage. I've tried versions 3.5 3.9 and the 4.6beta. I know to use the MOTO tag cyt46 MOTO
I have a factory default setup, I'm logged into the router with the status page up just to be sure. I laungh CYT, the IP is good, I press 1 then enter and it hangs on XML Server started and device is Motorola Box.
My firewall is diabled. To be safe I tried a seperate PC on the network and telneted to the port and recieved the data dump.
Any help unlocking this thing is very appreciated.
reply
rcilink @ 30th Dec 01:26PM:
Re: new release: CYT 4.6 [beta]
when you login to your moto vt2442, can you copy the firmware version string to here? It is possible they have a new version out now.
reply
ninthbit @ 30th Dec 02:25PM:
Re: new release: CYT 4.6 [beta]
As requested:
Product Information
Model Number VT2442
HW Revision 3
Serial Number 159358615825890301015005
Ethernet MAC 00:17:EE:02:13:D3
Software Versions
Gateway 11.4.0-r060818-1.2.0 -r2
Boot Loader 1.3.3.1101
reply
dariodario @ 15th Jan 02:46PM:
Re: new release: CYT 4.6 [beta]
:)AN OLD NEW METHOD TO UNLOCK WRTP54G 1.0.18 or 1.0.20
:(Even with this CYT 4.6 I wasn't able to unlock my WRTP54G.
I did it before, without any problem, but now, with this 1.0.18 I couldn't.
None of the CYT version were recognized.
SOLUTION:
:D- Thanks ricilink
:D- Thanks Mazilo
You both "inspired" me...
so:
IF the CYT doesn't go through the wrtp54g,
- link it to Internet (don't run any factory cd)
- factory reset it (keeping pressed the reset on the back)
- leave it for a bit (I left it overnight)
- switch off and start again the procedure, so
- access with 192.168.15.1 admin/admin
- forget any CYT, just
:D- go NOW into 192.168.15.1/update.htm user/tivonpw
(I know: it didn't work BEFORE! but it will work now!)
- update finally the FW
Other considerations:
:o- Somehow something changed, and I could access 192.168.15.1/update.htm with user/tivonpw that didn't work earlier!
:uhh:- this kind of provisioning didn't change the FW release
:huh:- CYT seems not to be working with this piece.
I hope this can help some of our friends.
reply
mazilo @ 15th Jan 03:21PM:
Re: new release: CYT 4.6 [beta]
For RTP300/WRTP54G (Vonage version), why not just use this to completely remove Vonage? I have mine done this way and I can freely factory reset it. I haven't tested to perform an upgrade with a non-NA firmware to find out if it will get relocked or not.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
rcilink @ 15th Jan 04:44PM:
Re: new release: CYT 4.6 [beta]
Interesting post.
Was your WRTP54G with firmware 1.0.18 a "vonage" device?
I dont know about that firmware version. Has this device been disconnected from the Internet for several years?
I think the common version for WRTP54G (vonage) is/was 1.00.62. I have also seen 3.1.20, but am not sure if that one was pushed by Vonage yet.
Is your device already upgraded to a different version?
If not, I would be interested in seeing the version stamp. (»192.168.15.1/version.txt)
reply
skypeuser @ 15th Jan 06:22PM:
Re: new release: CYT 4.6 [beta]
Thanks! I will try to see if I can update my firmware.
I have a wrtp54g with 1.00.18 firmware. This unit looks brand new. I don't know if it has ever been used on Vonage.
The tivonpw password doesn't work. I can't get to the update firmware page. I have tried several different options listed in this thread. Sofar I haven't been successful.I will post if this works. If others know how to upgrade my wrtp54g, I don't care what the method is I will appreciate it.
Thanks In Advance,
skypeuser
reply
rcilink @ 15th Jan 08:18PM:
Re: new release: CYT 4.6 [beta]
skypeuser, try this;
1. hook your wrtp54g up to the net and let it provision itself to vonage. It should be done in less than 1-2 minutes.
2. Once it has done that, try to get to the update.htm page with user / tivonpw. If that works, you can upgrade to unlocked fw.
Let us know how this works out.
reply
mazilo @ 15th Jan 10:05PM:
Re: new release: CYT 4.6 [beta]
said by skypeuser :
The tivonpw password doesn't work.
tivonpw is a user password assigned by Vonage through a provision. A factory default Linksys/Vonage WRTP54G has no such password for its user account.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
spender @ 15th Jan 11:04PM:
Re: CYT Device: Unlocking Information
Hello all - I just bought a VTech IP 8100 this week in Phoenix (Sharper Image is clearing them out for $39.95), and would love to unlock it. I have read through this thread (and the other ones) and have seen lots of tips. However, even though I have disabled my Windows XP firewall, tried from 3 PCs (all directly connected), even tried both IE and FireFox, etc., I still can't get CYT to get past the "Security Violation" screen. I have used CYT 3.5, 3.9, and 4.6, but no dice (even from the command prompt with the vtech switch). I have also logged in as Vtech and "user", but it still can't see me as logged in to the IP 8100. Help! Any tips? If someone can help me, that would be most appreciated! Do you need to be hooked up to the Internet (via the WAN port) for this to work?
reply
rcilink @ 15th Jan 11:27PM:
Re: CYT Device: Unlocking Information
just a guess...
on the CYT command-line, VTECH must be in uppercase.
reply
dariodario @ 15th Jan 11:48PM:
Re: new release: CYT 4.6 [beta]
:mad:It was NEW (with cellophane!)
Now, since I have unlocked it, after trying almost all known, I think that the mistake was not to link it to the web before.
(I have done it in the past with other wrtp54g with "normal" FW, and never had problems...)
QUESTION for using CYT whatever version:
AFTER unlocking either rtp300 or wrtp54g, I cannot use CYT again (onto UNLOCKED pieces)...
:huh:WHY?
reply
spender @ 16th Jan 01:12AM:
Re: CYT Device: Unlocking Information
Thanks! This has gotten me to the next screen, but still no success. It just seems to hang on the "working" screen.
My IP8100 device log says (near the end):
Received PROV_START
Received PROV_ERROR
Received PROV_START
Received PROV_ERROR
and so on...
I am using CYT35, but have also tried CYT46, but no dice. Any ideas, anyone??
reply
rcilink @ 16th Jan 08:36AM:
Re: new release: CYT 4.6 [beta]
Hmm,
Possibly, you are holding a WRTP54G unit with a really old firmware on it. Any chance you can hook it to the Internet and perform a Factory Reset on it?
Then, let it sit there for a half hour or less and see if it will update the firmware to 1.00.62 or something... ?
---------------
As for using CYT on unlocked units, CYT will not work on the firmware starting with v3.1.x versions. If you have updated the firmware, then it will not unlock using CYT.
If you unlocked a unit running 1.00.62, and hit the reset button (factory defaults), it should unlock again using CYT.
reply
mazilo @ 16th Jan 10:21AM:
Re: new release: CYT 4.6 [beta]
said by rcilink :
Possibly, you are holding a WRTP54G unit with a really old firmware on it. Any chance you can hook it to the Internet and perform a Factory Reset on it?
Before hooking the router to the Internet to let it get provisioned by Vonage, is there a possibility this firmware has some flaws to allow firmware upgrades without even a login as user/Admin? If so, then there is a way to hack this.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
jmdomini @ 16th Jan 11:30AM:
Re: CYT Device: Unlocking Information
Is it possible to use this unlock scheme but save the Vonage config? It would be nice to be able to use the second port for something else, but still be able to use the adapter for Vonage.
reply
mazilo @ 16th Jan 01:08PM:
Re: CYT Device: Unlocking Information
said by jmdomini :
Is it possible to use this unlock scheme but save the Vonage config? It would be nice to be able to use the second port for something else, but still be able to use the adapter for Vonage.
When you have unlocked your ATA, you should be able to access its Provision menu to grab the GPP_K (encryption key). Then, using this encryption key, you can decrypt the provision files manually downloaded from the provision server. With this encryption key and the downloaded set of provision files in sequence, you should be able to find the Admin password of your provisioned ATA device to access and make the necessary modifications; however, what you won't be able to do is to modify the provision files on the provision servers and these provision files can easily over write the existing configuration of your provisioned device.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
dariodario @ 16th Jan 01:48PM:
Re: new release: CYT 4.6 [beta]
rcilink, once again I have to honor you as a VOIP Guru, well supported by Mazilo and others!
Thanks to all of you for spending so much time in these forums.
;)
I didn't know that FW 3.1.17 does not allow to use CYT and then a flash through my mind:
Is it possible that fonage uses now new FW making the CYT useless?
This could explain this unusual FW I found in my SEALED wrtp54g.
:oIs it 3.1.17 still the best we can use?
If I downgrade to 1.00.xx, as you said, I should be able to re-use CYT (I will try this evening on my other rtp300).
Finally,
:oIF with the wrtp54g the cyt doesn't work, do you think is possible to use similar (and complicate) procedure necessary for rt31p2 (HTFT server, Apache, xml, etc...)?
;)Keep going!
reply
skypeuser @ 16th Jan 10:36PM:
Re: new release: CYT 4.6 [beta]
dariodario
"rcilink, once again I have to honor you as a VOIP Guru, well supported by Mazilo and others!
Thanks to all of you for spending so much time in these forums."
Thanks, dariodario for your post which encouraged me to try again. I left me wrtp54g hook to my Internet connection many times. I was never able to update from 1.00.18 to 1.00.62 but as you have posted it is now working.
I also applaud the above mentioned Gurus. They have made unlocking my many linksys products possible. Thanks for sharing the knowledge you have.
skypeuser :D
reply
mazilo @ 16th Jan 10:51PM:
Re: new release: CYT 4.6 [beta]
said by skypeuser :
rcilink, once again I have to honor you as a VOIP Guru, ...
Hmmm ..., interesting. Perhaps, ATAs hacking is more appropriate here. ;)
Regarding your Linksys/Vonage WRTP54G, can you manually perform a firmware upgrade? If you can, then perhaps you need to read this.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
skypeuser @ 16th Jan 11:26PM:
Re: new release: CYT 4.6 [beta]
mazilo
You did not copy the full quote. You are included as one of the Gurus. I have already done what you suggest. The unit is now running firmware wrtp54g_fw_3.1.17_US.
Thanks again for your help!
skypeuser :D
reply
spender @ 17th Jan 11:48AM:
Re: CYT Device: Unlocking Information
Hello - just a quick note to say that I did get my IP8100 working. The best advice is the old "watched pot" story - you truly have to get it running with the CYT35 VTECH (in caps) command and then leave it for a long time.
I got it running with Internetcalls, and it works great!
reply
dariodario @ 17th Jan 12:48PM:
wrtp54g killing fw 1.00.18 and similar
skypeuser,
Your success, encouraged by my post (as you said), made me feeling for a few seconds like being one of our Guru (Rcilink, Mazilo and Meister_SD, who I didn't mention before, but together with many others)....
Now I know "that" feeling, being a winner, of helping other users to be winners too! :o
:DT-H-A-N-K-S to all of you.
And... YES: fw 1.00.18 is hard to break, but it goes away after a bit of self-provisioning in Internet, and then user/tivonpw for the upgrade process! ENJOY ;)
reply
spender @ 17th Jan 10:44PM:
Re: CYT Device: Unlocking Information
Since I unlocked my IP8100 and set it up for internetcalls, I can no longer log into it via »192.168.15.1. It seems to try to connect but then just hangs and eventually fails (sort of as though the IP8100 is firewalling itself). This is the same whether I have it connected to my router or directly to my Ethernet port. What gives? How do I hard reset the IP8100?
Thanks,
Chris
reply
spender @ 18th Jan 12:06AM:
Re: CYT Device: Unlocking Information
I have unlocked my IP8100, and it works with internetcalls (always logs in and calls go through fine), but it seems I have lost the ability to log into the device. What gives? Do I need to do a hard reset and reprogram it?
reply
dariodario @ 18th Jan 12:55AM:
Now i am in trouble with CYT...
:huh:H-E-L-P ! :(
To "play" with the "new" information that CYT cannot work on 3.1.17 I had a very bad idea:
1. took my WORKING & unlocked rtp300 (3.1.17)
2. downgraded to 1.00.64 (just to try CYT again! what a fun!)
3. run CYT 4.6 (it SEEMED to work fine)
4. try to access the update page...
5. DISASTER: blocked by unknown password!
6. ????
:huh:
- What happened ?
- why CYT doesn't reset passwords?
- why NOW, even using cyt 3.5, 3.9c, 4.6 sometimes goes to the end (but still does NOT reset passwords), and sometimes doesn't even go through?
:uhh:
rcilink, mazi, .... any idea???
reply
rebeldean @ 19th Jan 08:11AM:
Re: Now i am in trouble with CYT...
I have an unlocked ip8100 I can get to the configuration page and I put in my voip providers info sip address, my username and password, but it still won't connect. I am using a router so according to the instructions on using the wan. But I have tried pluggin both into the router to no success. My provider (quantumvoice) says the machine isn't trying to connect. What am I doing wrong here? How do you program this thing?
reply
rcilink @ 19th Jan 10:35AM:
Re: Now i am in trouble with CYT...
remember.. if you use CYT46 and do a simple unlock (not use Custom XML option), you will see screen just before it goes to the "Simple XML server" part.
On that screen, you can set/change the passwords to use to unlock your box.
The password for the Admin account does not have to be "Admin", you can put anything in there now.
Same goes for the user account.
I would suggest you do this:
(since you loaded 1.00.64)
•Try login of Admin with no password (leave it blank). If that work's then you're done. Upgrade away.
If that does not work, then try these steps:
1. Factory reset the device. Do this by holding in reset button for almost full minute (and plug-in while holding button). LEDs will blink, and it will eventually reload defaults.
2. Try login to device. If reset, you can not login as user to /update.html page. (it will say 'disabled')
3. Run CYT46 and select your Admin and user passwords- then unlock.
Now, if it worked, you're done!
•If it did not work and this was really a VONage device, you could always try to let it provision itself. Hook to net and powercycle unit. Now try to login to /update.html as user with 'tivonpw' password.
Hope this helps you get back in..
reply
dariodario @ 19th Jan 01:50PM:
Re: Now i am in trouble with CYT...
:huh:
nope.
nope.
nope.
:(
This rtp300 was Vonage, then unblocked (cyt 3.9), loaded 3.1.17 and was working fine.
:o
Then I decided to play, and check if cyt, not working on 3.1.17, could work again with older fw.
Unluckily I loaded 1.00.64, and that's it. :huh:
I kept trying all you said and a lot more....
All versions of CYT NOW either don't go to the end, or go to the end, showing the process completed, but.....
THE SECRET PASSWORD IS STILL THERE!!!
:huh:
reply
dariodario @ 23rd Jan 08:21AM:
Re: Now i am in trouble with CYT...
:huh:I tried all possible CYT...
:(Sometimes they go to the end (process completed), but....
:(The password is still there, UNCHANGED!
It never happened to me before. :huh:
Has somebody had a similar problem? :uhh:
reply
rebeldean @ 25th Jan 06:55PM:
Re: Now i am in trouble with CYT...
I just did a few rtp300's and I noticed something odd. Sometimes the password is not Admin, but admin. Have you tried that. Are you also loading in new firmware to make this an NA box when you unlocked it from vonage?
reply
dariodario @ 26th Jan 01:01AM:
Re: CYT Device: Unlocking Information
rcilink, mazillo, please clarify:
IF the wrtp54g is NEW (never connected), with FW 1.00.18 or 1.00.20 it seems that CYT does NOT work at all. :(
When i then plug it into the wan, I see in my web activity log:
192.168.1.68 time.vonage.net
192.168.1.68 ti.tftp.vonage.net
192.168.1.68 tftp.vonage.net
but nothing good happens. :huh:
Am I doing something wrong?
I even left it connected for one full day!
:huh:CYT doesn't work
:huh:user/tivonpw doesn't work
:huh:user/8995523 or 7756112 neither
:uhh:ANY IDEA???
reply
skypeuser @ 26th Jan 04:07PM:
Re: CYT Device: Unlocking Information
I had this problem and was able with the advice in this thread to load 3.1.17 firmware. I hooked up my WRTP54G to the Internet wan port. I left it there for a couple of hours. When I logged into the web interface it had updated to 1.00.62 firmware. From there I was able to log into the /update.html page and upgrade and unlock this device.
You will need to be patient, but this will work. I have done this as have several others in this thread.
Good Luck! :D
reply
dariodario @ 29th Jan 07:32PM:
Re: CYT Device: Unlocking Information
I connected the Internet port of this wrtp54g to my Actiontec router always connected in Internet.
I left it for more than ONE DAY! :(
I checked (via the Actiontec web activity log file) that the wrtp54g IP connected to Vonage:
192.168.1.68 time.vonage.net
192.168.1.68 ti.tftp.vonage.net
192.168.1.68 tftp.vonage.net
but nothing good happened.
The FW 1.00.20 was still there...! :(
I will be back next week, and I will try whatever you may suggest me.... :huh:
Thanks for your support :D
reply
floriantet @ 2nd Feb 02:51AM:
VT2442
I have two VT2442
Using CYT 46 I am able to reset Admin password or configure the one having the Software Version: 11.1.0-r060427-0.7.1 -r3 but not the one having Software Version: 11.4.0-r061120-1.2.1 -r1 . On the last one, Simple XML provision server is waiting for ever.
The setup is the same - I am just replacing the router box, everything else is the same so I guess is the firmware...
I have also tried old versions of CYT with no luck.
reply
rcilink @ 2nd Feb 11:47AM:
Re: VT2442
can you login as user/tivonpw and downgrade the firmware to the 11.1 version?
reply
floriantet @ 2nd Feb 08:02PM:
Re: VT2442
Yes, downgrading was the trick, thanks
reply
tastyratz @ 3rd Feb 12:27PM:
Re: CYT Device: Unlocking Information
I have had a ton of issues with using CYT on my pap2 v2 Firmware Version: 1.00.13
I get cyt to successfully unlock the device so that it sets the Admin Admin username, but admin/admin still exists as a login and the cyt created Admin Admin will stop allowing me in after a little while. I can login with it right after an unlock but if I were to walk away from my pc and go out for lunch, when I came back it would say username and password errors.
If I re-unlock the device I can get back in and it doesnt revert to vonage settings or anything but it doesnt last. I have tried doing a factory reset and re-unlocking as well as several versions of cyt but it didnt work.
I am trying to configure this to work with viatalk service. I have never had a fully functional voip line in the 6 months ive been paying for it. Originally I couldnt get incoming, now I cant get incoming OR outgoing. When I woudl tweak the device it would only allow me to call out for a short time then stop working. After dialing I dont hear anything - no busy/fast busy/error/ etc just blank. Viatalk told me I need to be able to configure dtmf but I cant find it anywhere in here.
I wonder if the service stops working because its losing it login information. Anyone else have this issue?
reply
EnigmaLopez @ 6th Feb 11:27AM:
Re: CYT Device: Unlocking Information
Hi y'all...
I got my old RTP-300 from Vonage unlocked successfully, but I've ran into some issues. Set up a VoIPStunt account, and have it attached to the RTP-300, but only on 1 port. Got three questions for y'all:
1. Is it possible to replace the firmware with a non-Vonage version?
2. Are there XML files for CYT v4.6 that can allow me to configure both ports with VoIPStunt or another provider that are easy to edit?
3. Is there a file explaining all the options in the XML files?
I just want full control of my RTP-300, not this semi-crippled box that I've modified to some other VoIP provider... Any ideas?
reply
anon @ 7th Feb 12:47PM:
Re: CYT Device: Unlocking Information
Hi I unlocked my ip 8100 and put in my sip info but I still cannot get the phone to register I get a steady orange light. is there any other settings that need to be changed for me to get registered...?
reply
Luboso @ 9th Feb 12:48AM:
Re: CYT Device: Unlocking Information
said by cannylordelm :
Hi, anybody on this forum knows how to modify the DLink VTA, or Linksys PAP2 to not to have to press # after dialing the number?
reply
voiplover @ 9th Feb 12:53AM:
Re: CYT Device: Unlocking Information
I'm not the expert, but try eliminating the 10 digit dialing rule. Then just use 7 and 11 digit dialing.
I highly recommend starting this in a new thread because it is off topic.
reply
anon @ 12th Feb 06:04PM:
Re: VT2442
can you help me with a link to the firemware 11.1 of the VT2442 so i can download and unlkock the device
reply
worldofmanda @ 13th Feb 06:33PM:
Re: CYT Device: Unlocking Information
hi
i have used cyt35 on my vt2442 and now want to add second line from sipgate ar any other free service.
can you please guide on where to change configuration from, i can not change in cyt35 and also cant find where to download file tiYOURMAC from.
all help is appriciated.
thanks.
reply
pram @ 13th Feb 07:31PM:
Re: CYT Device: Unlocking Information
if you have used cyt35, then the vt2442 will no longer work with Vonage(unless you reset it), so you probably do not have even line1 configured. Try cyt4.6 and use one of the template xmls and update vt2442 to configure the lines.
reply
worldofmanda @ 13th Feb 07:41PM:
Re: CYT Device: Unlocking Information
hello,
thanks and yes you are right i just realised my phone is not working and i tried looking for cyt4.6 and not available anywhere. so where can i download cyt4.6 please.
thanks.
reply
worldofmanda @ 13th Feb 08:44PM:
Re: CYT Device: Unlocking Information
hi found the file, and run it but it removes all the settings and number also. where can i find the setting for vonage please thanks.
reply
pram @ 14th Feb 10:03AM:
Re: CYT Device: Unlocking Information
well, you cannot have both vonage and a different provider on the same box. Try resetting vt2442 to see if it gets back to the Vonage settings.
snippet from the readme.txt.
--------------------------------------------
Standard Disclaimer:
This program should only be used on devices that are not being
used with a service provider. So, use it with those old and
no-longer-used devices!..
---------------------------------------------
reply
worldofmanda @ 14th Feb 01:10PM:
Re: CYT Device: Unlocking Information
hi,
thanks, i have reset the box and the setting is back, so there is no way to get another provider as well as vonage on line 1 and a different service for line 2.
by the looks of things it seem as if it is possible and only depends on the way it is configured.
any way. is it possible to get 2 numbers for free from any 1 service provider because i want 1 for calls and the other for fax.
thanks.
reply
mazilo @ 14th Feb 01:24PM:
Re: CYT Device: Unlocking Information
said by worldofmanda :
..., so there is no way to get another provider as well as vonage on line 1 and a different service for line 2.
Yes, there is a way and this has been discussed here several times. I am not about to tell you how to do this because your device is still bound to a contract with your VoSP. If your device is not bound to any contract with your VoSP, then make your own XML file to contain your primary/secondary VoIP lines and feed, a.k.a. provision, it to your device. If you don't know how to do this, then it is better to leave your device provisioned by your VoSP. Otherwise, you may run into termination sanctions by your VoSP that may cost you more in the long run. You have been warned!
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
worldofmanda @ 14th Feb 01:36PM:
Re: CYT Device: Unlocking Information
hi, ofcourse i am not bound to anything with vonage.
the reason i am here is because they do not offer any support. i own the equipment an i am under no contract and out of there terms and conditions.
i do not know anything about XML. i have downloaded some but not for 2 lines also the settings for vonage are not available anywhere this is the only place things are happening. please help if you can.
thanks.
reply
mazilo @ 14th Feb 02:25PM:
Re: CYT Device: Unlocking Information
said by worldofmanda :
the reason i am here is because they do not offer any support. i own the equipment an i am under no contract and out of there terms and conditions.
Who is your VoSP on Line1? If you are not under any contract with any VoSP on Line1, then your device should not be locked by the VoSP. If it is still locked and servicing by VoSP, then you are bound by their TOS, AFAIK.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
worldofmanda @ 14th Feb 02:55PM:
Re: CYT Device: Unlocking Information
my 12 months contract is over with vonage. i am still with vonage but not under any contract.
i will leave vonage if i have to but want 2 lines. the only reason i have vonage on first line is because i can make calls to uk and ireland for free and i want 2nd line just for receiving fax. vinage will charge 5.99 for fax line and i really dont want to pay that.
thanks.
reply
mazilo @ 14th Feb 03:06PM:
Re: CYT Device: Unlocking Information
said by worldofmanda :
my 12 months contract is over with vonage. i am still with vonage but not under any contract.
But, your Line1 is still bound by the Vonage TOS which I believe doesn't allow any tempering. Like I said in my previous post, the information you want on how to do this is available on this forum. All you need is to search for it.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
worldofmanda @ 14th Feb 03:15PM:
Re: CYT Device: Unlocking Information
i will check this with vonage but the vonage setting will not be available can you possible provide me with vonage and sipgate xml settings.
or any 2 free service providers so that i can have 2 lines for incoming fax and calls.
thanks.
reply
mazilo @ 14th Feb 03:58PM:
Re: CYT Device: Unlocking Information
said by worldofmanda :
i will check this with vonage but the vonage setting will not be available can you possible provide me with vonage and sipgate xml settings.
Sorry, I am too cheap to use any commercial VoSPs. ;) So, no Vonage for me. :(
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
worldofmanda @ 14th Feb 04:34PM:
Re: CYT Device: Unlocking Information
hi,
me 2 am very poor, please guide me on how i can set it up totally free. who wants to pay for something available free.
thanks.
reply
pram @ 14th Feb 07:58PM:
Re: CYT Device: Unlocking Information
you can probably sign up at freedigits.com or stanaphone.com to get free inbound numbers, dont know how these work with fax. check out faxdigits.com to see if that will suffice. But again, none of them provide you with your local area-code number for free (voicestick.com does, but does not work with vt2442). You may endup getting numbers from Iowa or NY
reply
maps @ 26th Feb 10:14PM:
Re: CYT Device: Unlocking Information
Does anyone know how to get the voice page?
I ran the cyt46 vtech and have the messages that It has been reset the uid/password to Admin/Admin and user/user. However, I login to the website, but Unable to find any option to setup the voip
Thanks for your help!
Lan.
reply
voiplover @ 26th Feb 11:21PM:
Re: CYT Device: Unlocking Information
Sorry, but that software doesn't unlock the wrtp54-ER for earthlink. The locks are completely different. If it was another device that you are talking about Maps, then excuse me.
reply
rcilink @ 27th Feb 01:20AM:
Re: CYT Device: Unlocking Information
Assuming you are logging-in as Admin with the Password of Admin:
What version firmware is in your VTECH ?
I know of three versions.
•The first version does not have the Line1 settings page needed to set your SIP settings.
•The second version does have those html pages.
•The third version may not unlock using CYT.
The firmware version info should be displayed someplace in there..
reply
nukleuz @ 1st Mar 01:34AM:
Re: CYT Device: New Release : v3.3 includes Motorola vt2442 !!
i have a pap2 i bought from best buy 2 years ago i believe and i used with vongage.Now i had vonage discontinue my service and i'm trying to unlock it and try some other VOIP services out there but for some reason when i connect the device to my laptop,it does not pull a gateway therefore i cannot enter the router to even begin unlocking it
i used to have an RTP300 i unlocked with no problems a few years back and i gave that to a friend because i thought it was a little bulky now i have this cute one giving me problems
Does anyone know why i cant get into this router or how i should go about this?
--
cpu:quadcore QX6700
video card:evga 8800gtx
mobo:asus striker extreme
ram:2gb dominator pc2 8500c5d
monitor:24" dell ultrasharp
psu:620w enermax infinity
reply
rat478 @ 4th Mar 02:03PM:
Re: CYT Device: Unlocking Information
Hello,
I have unlocked a VT2442 using CYT4.6 and have configured it for FWD using the attached xml file (after changing the number and password). I am able to receive calls but my am not able to make any outgoing calls (including 613 - echo test). Can anyone please help.
Thanks very much
reply
anon @ 9th Mar 12:39AM:
Re: CYT Device: Unlocking Information
I have a WRTP54G with Vonage firmware v. 1.00.60. I wan to flash it w/ the new linksys fw to get all the functions enabled. You can't do anything on this bad boy. what really ticking me off if it doesnt allow for assigning static IPs within the LAN.
I ran cty4.6, i came back w/ the user/pass but they dont work. i cycled the router as suggested and nothing. i tired this a few month ago an got nowhere...any advice?
reply
voiplover @ 9th Mar 12:51AM:
Re: CYT Device: Unlocking Information
said by rat478 :
Hello,
I have unlocked a VT2442 using CYT4.6 and have configured it for FWD using the attached xml file (after changing the number and password). I am able to receive calls but my am not able to make any outgoing calls (including 613 - echo test). Can anyone please help.
Thanks very much
I saw somewhere that vonage started adding 666 to the dial plan.
Could that have anything to do with it?
reply
rat478 @ 10th Mar 09:46AM:
Re: CYT Device: Unlocking Information
I dont think the router is still talking to vonage. I had it unlocked from vonage. I am using the following settings in my xml file (changed the number and password below). Not sure if I need to add anything else in here.
<ADMIN_STATUS>1</ADMIN_STATUS>
<NET_REG_CHECK>0</NET_REG_CHECK>
<CID_NAME>Name</CID_NAME>
<CID_NUMBER>Number</CID_NUMBER>
<AUTH_USER_NAME>Number@fwd.pulver.com</AUTH_USER_NAME>
<AUTH_USER_PASSWD>password</AUTH_USER_PASSWD>
<PROXY_FQDN>fwdnat2.pulver.com</PROXY_FQDN>
<PROXY_PORT>5060</PROXY_PORT>
<REG_FQDN>fwd.pulver.com</REG_FQDN>
<REG_PORT>5060</REG_PORT>
<DIGIT_MAP>xxxxxxT|xxxxxT|xxxxT|xxxT|*1xxxxxxxxxxT|*3x.T|*4x.T|**x.T</DIGIT_MAP>
Thanks
reply
sumdum @ 10th Mar 01:31PM:
Re: CYT Device: Unlocking Information
hi rat,
not sure if this helps; I can receive calls from ipkall and make outgoing calls to 800#
settings I entered manually on a cisco 7940 phone, no dial plan.
line2_name: "my_fwd_#"
line2_displayname: "my_fwd_#"
line2_authname: "my_fwd_#"
line2_password: "my_fwd_passwd"
proxy2_address: fwd.pulver.com
proxy2_port:5061
reply
mazilo @ 10th Mar 02:36PM:
Re: CYT Device: Unlocking Information
Try to use the following:
<AUTH_USER_NAME>Number</AUTH_USER_NAME>
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
rat478 @ 11th Mar 11:27AM:
Re: CYT Device: Unlocking Information
Thanks Mazi. I tried using Number instead of Number@fwd.pulver.com and that did not help. After provisioning the router with Number in user name field instead of Number@fwd.pulver.com, I tried dialing 612 (time test on FWD) a couple of times and called myself a couple of times (to test incoming calls). I am still able to receive calls but no outgoing calls. The router has a system log for voice. I am cutting and pasting the log here. If anyone can make sense of this, I would appreciate it very much. This is what the system log looks like now:
0000237642 - CSeq: 235 REGISTER
0000237642 - Via: SIP/2.0/UDP 24.27.50.99:5060;branch=z9hG4bK-45f42ca3-6fd50-1b3ffdb9
0000237642 - WWW-Authenticate: Digest realm="fwd.pulver.com", nonce="45f42e729cf36d7d32ff590e40d5f6884e92a51e", algorithm=MD5
0000237642 - Content-Length: 0
0000237642 -
0000237643 - SSMU_RVREG Authantication Needed, unauth_count=2, 1012a784
0000237646 - SSMU: 1 ---} Message Sent:
0000237646 - REGISTER sip:fwd.pulver.com;transport=UDP SIP/2.0
0000237646 - From: {sip:#db*2@fwd.pulver.com;transport=UDP};tag=63321b18-13c4-45f42ca3-6fdbe-4ceb67ac
0000237646 - To: {sip:#db*2@fwd.pulver.com;transport=UDP}
0000237646 - Call-ID: 63321b18-13c4-45f42ada-572-b7579ae
0000237646 - CSeq: 236 REGISTER
0000237646 - Via: SIP/2.0/UDP 24.27.50.99:5060;branch=z9hG4bK-45f42ca3-6fdbe-54d9bc75
0000237646 - Max-Forwards: 70
0000237646 - Supported: replaces,timer,100rel
0000237646 - User-Agent: VT24420017EE00156311.1.0-r060427-0.7.1-20060427100438 1159336279937/ 308
0000237646 - Contact: {sip:#db*2@24.27.50.99:5060;transport=UDP}
0000237646 - Expires: 60
0000237647 - Content-Length: 0
0000237647 -
0000237698 - SSMU_RVREG 1012ae68, Srv=0, HostName=0, IpAddr=0
0000237698 - SSMU_RVREG 1012ae68, dest resolved IP=69.90.155.70
0000237740 - SSMU: 1 {--- Message Recd:
0000237740 - SIP/2.0 401 Unauthorized
0000237740 - From: {sip:#db*2@fwd.pulver.com;transport=UDP};tag=63321b18-13c4-45f42ca3-6fdbe-4ceb67ac
0000237740 - To: {sip:#db*2@fwd.pulver.com;transport=UDP};tag=cb2000b247d89723001a836145f3b053.7994
0000237740 - Call-ID: 63321b18-13c4-45f42ada-572-b7579ae
0000237740 - CSeq: 236 REGISTER
0000237740 - Via: SIP/2.0/UDP 24.27.50.99:5060;branch=z9hG4bK-45f42ca3-6fdbe-54d9bc75
0000237740 - WWW-Authenticate: Digest realm="fwd.pulver.com", nonce="45f42e729cf36d7d32ff590e40d5f6884e92a51e", algorithm=MD5
0000237740 - Content-Length: 0
0000237740 -
reply
rat478 @ 11th Mar 11:34AM:
Re: CYT Device: Unlocking Information
Please ignore the log in my previous post. I refreshed the status screen on the router to get this latest log. 819647 is my FWD number. It looks like some kind of registration failed. Again, any help will be deeply appreciated.
Thx
System log below:
0000491242 - SSMU_RVREG Registration Failed, 1012aa94
0000495768 - SSMU: 0 ---} Message Sent:
0000495768 - REGISTER sip:fwd.pulver.com;transport=UDP SIP/2.0
0000495768 - From: {sip:819647@fwd.pulver.com;transport=UDP};tag=63321b18-13c4-45f42ea7-ede6c-35fc985
0000495768 - To: {sip:819647@fwd.pulver.com;transport=UDP}
0000495768 - Call-ID: 63321b18-13c4-45f42ada-572-b7579ae
0000495769 - CSeq: 434 REGISTER
0000495769 - Via: SIP/2.0/UDP 24.27.50.99:5060;branch=z9hG4bK-45f42ea7-ede6c-410d83da
0000495769 - Max-Forwards: 70
0000495769 - Supported: replaces,timer,100rel
0000495769 - User-Agent: VT24420017EE00156311.1.0-r060427-0.7.1-20060427100438 1159336279937/ 308
0000495769 - Contact: {sip:819647@24.27.50.99:5060;transport=UDP}
0000495769 - Expires: 60
0000495769 - Content-Length: 0
0000495769 -
0000495799 - SSMU_RVREG 1012a5fc, Srv=0, HostName=0, IpAddr=0
0000495799 - SSMU_RVREG 1012a5fc, dest resolved IP=69.90.155.70
0000495844 - SSMU: 0 {--- Message Recd:
0000495845 - SIP/2.0 600 Too Frequent Requests
0000495845 - From: {sip:819647@fwd.pulver.com;transport=UDP};tag=63321b18-13c4-45f42ea7-ede6c-35fc985
0000495845 - To: {sip:819647@fwd.pulver.com;transport=UDP};tag=cb2000b247d89723001a836145f3b053.96eb
0000495845 - Call-ID: 63321b18-13c4-45f42ada-572-b7579ae
0000495845 - CSeq: 434 REGISTER
0000495845 - Via: SIP/2.0/UDP 24.27.50.99:5060;branch=z9hG4bK-45f42ea7-ede6c-410d83da
0000495845 - Content-Length: 0
0000495845 -
0000495845 - SSMU_RVREG Registration Failed, 1012a5fc
notification: priv-}noc: 1 noc:0 vps:0 ipt:0
0000497135 - SSMU: 0, call_id=0, state WAIT_INV_PROV_RESP gets event PSU_RELEASE
0000497137 - SSMU_TERMINATE_NW_CALL Entered....
0000497137 - SSMU: 0 WAIT_INV_PROV_RESP ==} IDLE
0000497137 - 269041208: ssmu_util_call_leg_free called. ssmu_ref=6, state=IDLE, coding=255, 116, 127
reply
AndrewZ @ 11th Mar 02:26PM:
Re: CYT Device: Unlocking Information
Answer is in the log:
You have
but server says it's too low and offering you allowed minimum (600)
0000495845 - SIP/2.0 600 Too Frequent Requests
You should set the right value:
<REG_EXPIRE_TIMER>600000</REG_EXPIRE_TIMER>
reply
rat478 @ 11th Mar 03:19PM:
Re: CYT Device: Unlocking Information
I changed the REG_EXPIRE_TIMER to 600000. (It was originally set to 60000.) But that did not help. Still can not make outgoing calls. Here are the common coding config and SIP config settings from the XML file I am using.
<COMMON_CODING_CONFIG>
<VAD_ENABLE>0</VAD_ENABLE>
<DIGIT_RELAY_MODE>1</DIGIT_RELAY_MODE>
<VOICE_PLAYOUT_MODE>1</VOICE_PLAYOUT_MODE>
<NOM_DELAY>60</NOM_DELAY>
<MAX_DELAY>120</MAX_DELAY>
<MIN_DELAY>20</MIN_DELAY>
<RING0_CADENCE>0x00000FFC00000000</RING0_CADENCE>
<RING1_CADENCE>0xFFFFF00000000000</RING1_CADENCE>
<RING2_CADENCE>0xFF0FF00000000000</RING2_CADENCE>
<RING3_CADENCE>0xF3CFF00000000000</RING3_CADENCE>
<RING4_CADENCE>0xE7FE700000000000</RING4_CADENCE>
<RING5_CADENCE>0xF800000000000008</RING5_CADENCE>
<RING6_CADENCE>0xF9CFF00000000000</RING6_CADENCE>
<RING7_CADENCE>0xFFFFF00000000000</RING7_CADENCE>
<DIAL_TONE>350:-130,440:-130,0:0,0:0,-1</DIAL_TONE>
<BUSY_TONE>480:-240,620:-240,0:0,0:0,500;0:0,0:0,0:0,0:0,500</BUSY_TONE>
<RINGBACK_TONE>440:-190,480:-190,0:0,0:0,2000;0:0,0:0,0:0,0:0,4000</RINGBACK_TONE>
<REMOTE_DISCONNECT_TONE>10:-600,0:0,0:0,0:0,-1</REMOTE_DISCONNECT_TONE>
<DISCONNECT_TONE>480:-240,620:-240,0:0,0:0,250;0:0,0:0,0:0,0:0,250;480:-240,620:-240,0:0,0:0,250;0:0,0:0,0:0,0:0,-1</DISCONNECT_TONE>
<OUT_OF_SERVICE_TONE>480:-240,620:-240,0:0,0:0,250;0:0,0:0,0:0,0:0,250</OUT_OF_SERVICE_TONE>
<CONGESTION_TONE>480:-240,620:-240,0:0,0:0,250;0:0,0:0,0:0,0:0,250</CONGESTION_TONE>
<OFFHOOK_NOTICE>1400:030,2060:030,2480:030,2600:030,100;0:0,0:0,0:0,0:0,100</OFFHOOK_NOTICE>
<OFFHOOK_ALERT>1400:030,2060:030,2480:030,2600:030,100;0:0,0:0,0:0,0:0,100</OFFHOOK_ALERT>
<CW1_TONE>440:-130,0:0,0:0,0:0,300;0:0,0:0,0:0,0:0,-1</CW1_TONE>
<CW2_TONE>440:-130,0:0,0:0,0:0,100;0:0,0:0,0:0,0:0,100;440:-130,0:0,0:0,0:0,100;0:0,0:0,0:0,0:0,-1</CW2_TONE>
<CW3_TONE>440:-130,0:0,0:0,0:0,100;0:0,0:0,0:0,0:0,100;440:-130,0:0,0:0,0:0,100;0:0,0:0,0:0,0:0,100;440:-130,0:0,0:0,0:0,100;0:0,0:0,0:0,0:0,-1</CW3_TONE>
<CW4_TONE>440:-130,0:0,0:0,0:0,100;0:0,0:0,0:0,0:0,100;440:-130,0:0,0:0,0:0,300;0:0,0:0,0:0,0:0,100;440:-130,0:0,0:0,0:0,100;0:0,0:0,0:0,0:0,-1</CW4_TONE>
<TELEPHONE_EVENT_PT>101</TELEPHONE_EVENT_PT>
<PCMU_PT>0</PCMU_PT>
<PCMA_PT>-1</PCMA_PT>
<G726_40_PT>-1</G726_40_PT>
<G726_32_PT>2</G726_32_PT>
<G726_16_PT>-1</G726_16_PT>
<G726_24_PT>-1</G726_24_PT>
<G729_PT>18</G729_PT>
<G723_PT>-1</G723_PT>
<RTP_T38_PT>-1</RTP_T38_PT>
<UDP_T38_PT>114</UDP_T38_PT>
<RED_PT>-1</RED_PT>
<T38_RED_LEVEL>2</T38_RED_LEVEL>
</COMMON_CODING_CONFIG>
<SIP_CONFIG>
<TIMER_T1>2000</TIMER_T1>
<TIMER_T2>32000</TIMER_T2>
<TIMER_T4>5000</TIMER_T4>
<TIMER_B>10000</TIMER_B>
<TIMER_D>32000</TIMER_D>
<TIMER_F>35000</TIMER_F>
<TIMER_H>32000</TIMER_H>
<TIMER_J>32000</TIMER_J>
<MAX_TRANSMISSIONS>4</MAX_TRANSMISSIONS>
<REG_EXPIRE_TIMER>600000</REG_EXPIRE_TIMER>
<REG_FAILRETRY_TIMER>20000</REG_FAILRETRY_TIMER>
<UDP_LISTEN_PORT>5060</UDP_LISTEN_PORT>
<TCP_LISTEN_PORT>5060</TCP_LISTEN_PORT>
<RTP_PORT_START>8000</RTP_PORT_START>
<RTP_PORT_END>8020</RTP_PORT_END>
<RTP_TOS>0xb8</RTP_TOS>
<SIG_TOS>0x68</SIG_TOS>
<SDP_CODEC_SELECTION>1</SDP_CODEC_SELECTION>
<SDP_HOLD0_ENABLE>1</SDP_HOLD0_ENABLE>
<TRUSTED_SIP_SOURCE>1</TRUSTED_SIP_SOURCE>
<SESSION_TIMER_SE>0</SESSION_TIMER_SE>
<SESSION_TIMER_MinSE>0</SESSION_TIMER_MinSE>
<PERIODIC_NTFY_INTERVAL>0</PERIODIC_NTFY_INTERVAL>
<SIP_TRANS_PROTOCOL>0</SIP_TRANS_PROTOCOL>
<UA_HEADER_INFO>%i%M%v-r%d-%V-%t 1159336279937/ 308</UA_HEADER_INFO>
</SIP_CONFIG>
let me know if you want me to post the current voice log file again from the router.
Thank you all for your help. I appreciate it very much.
Rajesh
reply
AndrewZ @ 11th Mar 03:53PM:
Re: CYT Device: Unlocking Information
said by rat478 :
I changed the REG_EXPIRE_TIMER to 600000. (It was originally set to 60000.) But that did not help. Still can not make outgoing calls.
But do you have successful registration now?
I do not understand can not make.
Please post the log, showing your INVITE and server's responce.
reply
rat478 @ 11th Mar 06:20PM:
Re: CYT Device: Unlocking Information
Here is the voice log. When I lift the receiver to make any call, I can hear the dial tone. But once I dial any number, the phone goes silent, as if the line were dead. Anyway, here is the log.
0000096171 - SSMU_RVREG Registration Failed, 1012a538
0000098334 - SSMU: 0 ---} Message Sent:
0000098334 - REGISTER sip:fwd.pulver.com;transport=UDP SIP/2.0
0000098334 - From: {sip:819647@fwd.pulver.com;transport=UDP};tag=63321b18-13c4-45f48dc9-2b9c9-3acae9d9
0000098334 - To: {sip:819647@fwd.pulver.com;transport=UDP}
0000098334 - Call-ID: 63321b18-13c4-45f48d17-215-6e942689
0000098334 - CSeq: 91 REGISTER
0000098334 - Via: SIP/2.0/UDP 24.27.50.99:5060;branch=z9hG4bK-45f48dc9-2b9c9-527bdf9e
0000098334 - Max-Forwards: 70
0000098334 - Supported: replaces,timer,100rel
0000098334 - User-Agent: VT24420017EE00156311.1.0-r060427-0.7.1-20060427100438 1159336279937/ 308
0000098334 - Contact: {sip:819647@24.27.50.99:5060;transport=UDP}
0000098334 - Expires: 60
0000098334 - Content-Length: 0
0000098334 -
0000098361 - SSMU_RVREG 1012a5fc, Srv=0, HostName=0, IpAddr=0
0000098361 - SSMU_RVREG 1012a5fc, dest resolved IP=69.90.155.70
0000098404 - SSMU: 0 {--- Message Recd:
0000098404 - SIP/2.0 600 Too Frequent Requests
0000098404 - From: {sip:819647@fwd.pulver.com;transport=UDP};tag=63321b18-13c4-45f48dc9-2b9c9-3acae9d9
0000098405 - To: {sip:819647@fwd.pulver.com;transport=UDP};tag=cb2000b247d89723001a836145f3b053.efdf
0000098405 - Call-ID: 63321b18-13c4-45f48d17-215-6e942689
0000098405 - CSeq: 91 REGISTER
0000098405 - Via: SIP/2.0/UDP 24.27.50.99:5060;branch=z9hG4bK-45f48dc9-2b9c9-527bdf9e
0000098405 - Content-Length: 0
0000098405 -
0000098405 - SSMU_RVREG Registration Failed, 1012a5fc
notification: priv-}noc: 1 noc:0 vps:0 ipt:0
0000101347 - SSMU: 0, call_id=0, state WAIT_INV_PROV_RESP gets event PSU_RELEASE
0000101349 - SSMU_TERMINATE_NW_CALL Entered....
0000101349 - SSMU: 0 WAIT_INV_PROV_RESP ==} IDLE
0000101349 - 269041208: ssmu_util_call_leg_free called. ssmu_ref=5, state=IDLE, coding=255, 116, 127
Thanks again
reply
AndrewZ @ 12th Mar 04:02AM:
Re: CYT Device: Unlocking Information
I don't see any changes - you still have Expires: 60 and Registration Failed.
And, as I asked before - please post the log, showing your INVITE and server's responce.
reply
rat478 @ 12th Mar 05:03PM:
Re: CYT Device: Unlocking Information
This is the only log that the router shows. I am not sure how to extract the invite information from the router.
reply
rcilink @ 13th Mar 10:16AM:
Re: CYT Device: Unlocking Information
Possibly try this:
dial 123#
(put the '#' on the end of your number being dialed)
While doing this, refresh the logs (the same place u captured above from)..
The INVITE should show in there.
123 being an invalid number should give you a fast busy signal. But, it at least sent the request. Let us know if this does return a fast busy.
reply
trafael1 @ 19th Mar 12:22AM:
Re: CYT Device: Unlocking Information
I have a similar problem. My PAP2V2 works fine for about a week when suddenly i stop being able to dial out (fast busy signal after dialing first digit on both lines which are set up with different VOIP's). Incoming calls still work fine. This happens regularly and then i have to jump throgh hoops to reset it. It is very annoying and I can't seem to fix it for good( I tried even feeding my own xml file etc). I am just about to give up on the PAP2V2.
Does everyone experience such difficulties on a regular basis? I can;t use this POS if it is so unreliable.
reply
rat478 @ 19th Mar 12:45AM:
Re: CYT Device: Unlocking Information
I think there is some hardware issue with my VT2442. Now, the power light is red all the time and doesn't change to green even if I reboot/reset it. It is also unable to store the xml file I am sending it. After every reboot, I have to re-unlock it and reprovision it. I am getting a PAP2 and will trash the VT2442 once my PAP2 arrives.
reply
khanji6 @ 19th Mar 08:08PM:
UNlocking RTP 300 PLEASE HELP ME
Hello all, I am new to this, i dont even know how to place a question on this foroum , pls help me with that , My qury is , I hav a RTP 300 linksys's voip device which is Locked, i am unable to accecc its Voice page , the firm ware in it is Firmware Version: 1.00.52 , I tried CYT 3.5 and 3.9c but , i am unable to get success, i guess i am not doing it in the right way,
MY Firmware Version: 1.00.52
I First hardware restted it using the reset button by holding it for about 60 SEC, then , logged in using ip 192.168.15.1,,
then Typed in admin/admin as user name and pasword ,
then went to comand
Executed both cyt 3.5 and 3.9 c , as per the menu i pressed 1, its stays on some XML screen and says user anme is Admin, and pass is Admin,
but when i login my device again , it dosent accept "Admin/Admin,, instead it accepts old admin/admin, then when i go into administtration tab , i dont find the voice sip ettings, pleaes please help me , i am struggling fr past few weeks but no success, pls guide me , how to unlock it , and how to post pics of the linksys pages ?? pls reply, my email is "myy_own_khanji@yahoo.co.in "
I even downloaded the 3.17 firmware (.img) but inside the page of my voip router i am unable to find the firmware update page ?? how to update it pls help.
reply
allanjohn @ 29th Apr 12:52PM:
Re: CYT Device: Unlocking Information
I tried to use cyt46_win32 with windows Vista, I deactivated my firewall, I even activated a port fowarding (2400/TCP) and the software is still giving me a
"Security Violation!
You must login to your device at IP:192.168.0.4 using a web browser before
using this program!
This security measure prevents misuse of this program."
I tried wireless router, I tried lan, I also tried windows XP
Can anyone help me
reply
mazilo @ 29th Apr 01:42PM:
Re: CYT Device: Unlocking Information
said by allanjohn :
"Security Violation!
You must login to your device at IP:192.168.0.4 using a web browser before
using this program!
This security measure prevents misuse of this program."
Did you heed the above message?
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
allanjohn @ 29th Apr 01:49PM:
Re: CYT Device: Unlocking Information
said by mazilo :said by allanjohn :
"Security Violation!
You must login to your device at IP:192.168.0.4 using a web browser before
using this program!
This security measure prevents misuse of this program."
Did you heed the above message?
Yes I tried with my browser internet explorer 7 and firefox, I'm able to login in the user mode, I even tried accessing the admin page and letting the login window waiting for my input of admin name and admin pass will letting the CYT trying to access the router with no succes
reply
bingbing @ 9th May 09:33PM:
Re: new release: CYT 4.6 [beta]
thanks very much for this release. i have put an old rtp300 to good use again. unlike the old versions, this one worked immediately. only downside is that it seems to work with only 1 line. any newer versions that will allow me to use both line 1 & 2?
reply
boonkang @ 30th May 05:14PM:
Re: CYT Device: Unlocking Information
said by boogerman69 :
Interesting Steve006
Since the PAP2V2 and the Vtech IP8100 are the same chipset, I have noticed that same issue with the 8100
Now after tweaking the crap out of this phone, I think I might have fixed this problem. I have had it online since about 8pm last night. It still shows registered. If it stays on, I will post what settings I can think of. One change I did make was to put an XML in a valid tftp server and I have pointed the 8100 to that server. There is some suspicion that this device will go to sleep after so many unsuccessful attempts at pulling provisioning info.
I don't know anything about the PAP2v2, but maybe there is "unlocked" firmware that once loaded should stop any strange behavior.
Hello, Boogerman69.
Was this annoying problem really fixed ? If so, could you kindly post the settings you used to fix the problem ?
You can email me the reponse: boon(underascore)kang(at)yahoo(dot)com.
reply
floriantet @ 26th Jul 10:52PM:
Is this the end of CYT ?
A while ago CYT 4.6 stopped working for latest firmware versions. Then for a while the 'downgrade first' solution worked. Now it looks like they have changed the tivonpw password so a downgrade could not be made. Does any one now if there is a new password ? If not then this is the end of using CYT ?
reply
dm33 @ 26th Jul 11:02PM:
Re: Is this the end of CYT ?
said by floriantet :
A while ago CYT 4.6 stopped working for latest firmware versions. Then for a while the 'downgrade first' solution worked. Now it looks like they have changed the tivonpw password so a downgrade could not be made. Does any one now if there is a new password ? If not then this is the end of using CYT ?
I bought a PAP2 v2 from bestbuy. It came with firmware 1.00.13. I let Vonage upgrade it to firmware 1.00.16.
I was still able to unlock it using CYT although I had problems getting the generic.xml configuration file to update the phone adapter.
Which firmware version doesn't work?
reply
mazilo @ 27th Jul 07:45AM:
Re: Is this the end of CYT ?
said by floriantet :
Does any one now if there is a new password ? If not then this is the end of using CYT ?
When you had your device unlocked, did you make/safe a copy of the encryption key along with the Vonage server, XML path/file names? If so, then you can manually retrieve/decrypt this XML provision file to find out what password is for the user account.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
anon @ 30th Jul 10:18AM:
Re: CYT Device: Unlocking Information
i can't downgrade vt2442 with logging in by router/pw:router, how can i downgrade it, if have some way, please mail to me: lyh-yh@126.com, thanks
reply
floriantet @ 30th Jul 12:09PM:
Re: Is this the end of CYT ?
said by mazilo: did you make/safe a copy of the encryption key along with the Vonage server, XML path/file names?
Of course I did for the device unlocked in the past. I now am talking about another device which was let say until yesterday in service with Vonage and it has never been unlocked. I have encountered or I have seen reports for PAP2 (1.0.22), Motorola , Vtech, WRTP54G: on the latest firmware CYT does not work and a downgrade could not be performed (as I did before) because could not log in as I could before.
For lyh put as user user not router
reply
mazilo @ 30th Jul 12:58PM:
Re: Is this the end of CYT ?
said by floriantet :
Of course I did for the device unlocked in the past. I now am talking about another device which was let say until yesterday in service with Vonage and it has never been unlocked.
From the past experience, Vonage seems to have use a more general user password. If you suspect Vonage has change user password from tivonpw to something else, then download the XML provision file for the device you have its encryption key. Then, decrypt the file to find what is the current user password. If it is still the same as tivonpw, then you will need to wait for other readers to find out the new user password used by Vonage.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
floriantet @ 30th Jul 02:57PM:
Re: Is this the end of CYT ?
said by mazilo :
If you suspect Vonage has change user password from tivonpw to something else, then download the XML provision file for the device you have its encryption key. Then, decrypt the file to find what is the current user password.
Unfortunately line with the userpwd setting is missing from new xml files (just downloaded them from default directory and then the second one from second directory). As a result if you have a device that is new or has been reset to factory defaults or it has been provisioned just recently, then even after provisioning the user password is probably unchanged - the same as when the device was new (factory defaults)
reply
mazilo @ 30th Jul 09:45PM:
Re: Is this the end of CYT ?
said by floriantet :
Unfortunately line with the userpwd setting is missing from new xml files (just downloaded them from default directory and then the second one from second directory). As a result if you have a device that is new or has been reset to factory defaults or it has been provisioned just recently, then even after provisioning the user password is probably unchanged - the same as when the device was new (factory defaults)
So, this means the user (probably including the Admin) account on your PAP2v2 will have a factory default password even after it has been provisioned by Vonage. If this is true, then it is time to crack the Admin password hashed key of a PAP2v2 which I believe is the same one for every PAP2v2 units sold out there. In this case, we need to find someone who has a supercomputer to crack this hashed key using John The Ripper Password Cracker.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
dm33 @ 30th Jul 11:19PM:
Re: CYT Device: Unlocking Information
I tried unlocking a PAP2 v2. I was able to unlock it successfully with CYT46. However the generic.xml file did not get uploaded to the phone adapter. I'd make changes to the file, resync and it wouldn't show the changes. There are many fields in the xml file which can't be accessed via the menus.
Does it work to upload the XML file? Is there some trick to it?
reply
mazilo @ 31st Jul 07:06AM:
Re: CYT Device: Unlocking Information
said by dm33 :
There are many fields in the xml file which can't be accessed via the menus.
I believe you can manually edit the XML file using a notepad editor on a Windows OS.
--
Mazi (UK Non-Geo Phone: +44-703-194-2574)
reply
floriantet @ 31st Jul 11:36AM:
Re: Is this the end of CYT ?
said by mazilo :
So, this means the user (probably including the Admin) account on your PAP2v2 will have a factory default password even after it has been provisioned by Vonage
True for user, not true for admin: only the userpwd setting is missing in xml files, the adminpwd is present in the first downloaded file (default directory) and it does contain a value unique for each adapter.
My hope is that there will be a new version of CYT that will unlock the new firmware versions (or if someone knows that is not possible, then say it).
reply
anon @ 7th Aug 06:30PM:
Re: CYT Device: Unlocking Information
This has been driving me nuts while I search around the net - I'm trying to flash a vt2442 and i understand that the firmware version I have (11.4) seems impervious to unlocking. To do so I've been trying to find 11.1 to that I can downgrade the firmware and handle it. But, all I've found (all over the net) are people acknowledging this and looking for the old version of the firmware. Could someone please give me some idea as to where to find the firmware (if it's possible at all?)??
Thanks!
Dave
reply
boonkang @ 10th Aug 05:25PM:
Re: CYT Device: Unlocking Information for Vtech IP8100
Although IP8100 is built on the same hardware as RTP300, PAP2-V2,etc, but unlike the rest, this is a cordless phone, it supports only 1 line instead of 2 lines and it does not use IVR. Therefore, I suspect its firmware is not compatible from other CYT devices (i.e. you can not load firmare of PAP2-NA onto IP8100 to get a totally unlocked IP8100 like you can with other CYT devices).
Furthermore, IP8100 seems to have this unigue freezing and resetting problem which requires further handling after unlocking using CYT unlock software. I posted on the other thread the remedial procedure, I am posting here for wider exposure and discusion (hoping that experts like Mazilo, Rcilink and others can provide more insights to the nature of IP8100):
procedure to prevent the freezing and resetting after CYT unlocking (first draft)
1. Upgrade firmware from vtech-11.4.0-r060330-4.016.1-r000015 to vtech-11.4.1-r070125-4.019.1-r000015. (NOTE. You should NOT upgrade prior to the unlocking - it was reported that CYT may not work with the new firmware).
2. Copy the decrypted xml file to create a new copy of ti(MAC-address).xml, and edit as follows:
3. setup a tftp server on the same LAN as the IP8100. Deposit the new xml file created and edited earlier in the folder /vtech of the tftp server. (the idea is for IP8100 to do the provisioning with this "safe" copy of xml file -- instead of the Vonage copy).
4.Log into IP8100 admin page 192.168.15.1 with Admin/Admin account and edit the provisioning page as suggested by Andrew_Z:
NOTE: 192.168.5.77 is the ip address of PC where the tftp is running.
NOTE. The purpose of steps 2, 3 and 4 are necessary to prevent IP8100 from doing auto-provisioning with the VONAGE xml file which causes the freezing and resetting (and re-locking ?) problems.
My questions about this procedure:
1. The value of 900000 in the interval field suggests that IP8100 will retrieve the config file from tftp://192.168.5.77 every 9000 secconds (150 minutes), this means the setup of tftp server must be there permanently (at least when IP8100 is online). Why can't we set a very large value like 9000000 X 100000 which would yield
over 30 years for IP8100 to retrieve teh config file, so that we don't need to depend on our tftp server ?
2. There are 2 things we need to change/edit: first is the decrypted config file ti(MAC-address).xml which we deposit with the tftp server, second is the IP8100 admin page 192.168.15.1. The modifed admin page will cause IP8100 to download the config file ti(MAC-address).xml from our tftp server, would this config file update the admin page again ? If yes, would new admin page cuase IP8100 to retrieve config file from Vonage when the device goes online (i.e. connect to Internet) ?
reply
spv69 @ 4th Sep 12:38PM:
Re: CYT Device: Unlocking Information for Vtech IP8100
Any success unlocking IP8100 from VTECH lately?
I did everything as it described here but still getting Security Validation. You must login to your device … message when try to use any option from CYT.
What I did:
* Connected directly to the device.
* Open internet browser and logged in to the device using VTECH as password (found 2 ways of loggin in: user + user and vtech + vtech - this one seems to be admin level as it provide much more options to play with. admin + admin didn't work)
* Turned off windows firewall and virus protection
* Opened port 2400
* Tried over and over with all versions of CYT from 3.0 to 4.6
* From Status Screen: Firmware Version: 11.4.1-r070125
Release Number: 4.019.1-r000015
Bootloader Version: 1.3.3.1101
Still no lack.
If anybody has any ideas please help! Thanks.
reply
floriantet @ 19th Sep 10:33PM:
Re: Is this the end of CYT ?
said by mazilo :
we need to find someone who has a supercomputer to crack this hashed key.
1. Do I need a supercomputer or I can use somehow 3-4 good computers (2GHz is the slowest) in parallel ?
2. Ok suppose I have the Eprom image for almost any device: for a new PAP2v2 or a new VT2142 or IP8100 ...
How can I extract the files (including password file) or the hashed key from the eprom image ? I'm thinking that maybe we can find out if there is or not one factory default password for admin or user
reply
mazilo @ 19th Sep 11:20PM:
Re: Is this the end of CYT ?
said by floriantet :
1. Do I need a supercomputer or I can use somehow 3-4 good computers (2GHz is the slowest) in parallel ?
Sure. The faster the computer, the faster the brute force program (JTR) will find the password(s).
reply
DaveTap @ 24th Sep 12:40PM:
Re: CYT Device: Unlocking Information for Vtech IP8100
said by spv69 :
Any success unlocking IP8100 from VTECH lately?
I did everything as it described here but still getting Security Validation. "You must login to your device"
From Status Screen: Firmware Version: 11.4.1-r070125
Release Number: 4.019.1-r000015
Bootloader Version: 1.3.3.1101
Still no luck.
If anybody has any ideas please help! Thanks.
You should not get security violation... make sure to run from command line w/VTECH argument like... C:\cyt46.exe VTECH
It will probably hang at "Simple XML provision server is waiting for you device"... I have 4 w/that version haven't unlocked.
reply
Thank you for using lo-fi dslreports.com - report bugs
© 99-2010 silver matrix LLC
cyt_35_win32.zip 29,590 bytes
